高真空压铸技术在汽车变速箱壳体中的应用

赵卫红; 苏海章; 黄志垣; 张玉龙

doi:10.15980/j.tzzz.2018.05.014

压力铸造 | 浏览量 : 0 下载量: 138 CSCD: 1

导出
分享
收藏
专辑

高真空压铸技术在汽车变速箱壳体中的应用
Application of High Vacuum Technology in Die-Casting Vehicle Transmission Housing
2018年38卷第5期页码：514-516
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.05.014

扫描看全文

[1]赵卫红,苏海章,黄志垣,张玉龙.高真空压铸技术在汽车变速箱壳体中的应用[J].特种铸造及有色合金,2018,38(05):514-516.

Zhao Weihong, Su Haizhang, Huang Zhiyuan, et al. Application of High Vacuum Technology in Die-Casting Vehicle Transmission Housing[J]. Special Casting & Nonferrous Alloys, 2018,38(5):514-516.
[1]赵卫红,苏海章,黄志垣,张玉龙.高真空压铸技术在汽车变速箱壳体中的应用[J].特种铸造及有色合金,2018,38(05):514-516. DOI： 10.15980/j.tzzz.2018.05.014.

Zhao Weihong, Su Haizhang, Huang Zhiyuan, et al. Application of High Vacuum Technology in Die-Casting Vehicle Transmission Housing[J]. Special Casting & Nonferrous Alloys, 2018,38(5):514-516. DOI： 10.15980/j.tzzz.2018.05.014.

摘要

以变速箱壳体压铸生产中的缺陷为研究对象

采用高真空压铸技术

改善了铸件的内部气孔状态和力学性能。对比发现

使用高真空压铸工艺后

压铸件的油道漏气率大幅降低

合格率达到97%

降低了成本。高真空压铸件的抗拉强度和伸长率分别比普通真空铸件提高了约17.4%和37.1%。

Abstract

The defects in die-casting transmission housing were investigated

and the internal porosity condition and mechanical properties of the transmission housing were improved by applying high vacuum die-casting technology.The results reveal that the gas leakage rate of the oil passages is reduced greatly after using high vacuum technology

and the yield rate is increased to 97%

decreasing greatly cost.Compared with those of conventional vacuum castings

the tensile strength and elongation of high vacuum castings are increased by 17.4% and 37.1%

respectively.