重力铸造铝合金前副车架纵梁铸件

苏为强; 李云翔

doi:10.15980/j.tzzz.2018.04.011

计算机应用技术 | 浏览量 : 0 下载量: 153 CSCD: 1

导出
分享
收藏
专辑

重力铸造铝合金前副车架纵梁铸件
Gravity Casting Aluminum Alloy Front Sub-frame Side Beam Casting
2018年38卷第4期页码：388-390
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.04.011

扫描看全文

[1]苏为强,李云翔.重力铸造铝合金前副车架纵梁铸件[J].特种铸造及有色合金,2018,38(04):388-390.

Su Weiqiang, Li Yunxiang. Gravity Casting Aluminum Alloy Front Sub-frame Side Beam Casting[J]. Special Casting & Nonferrous Alloys, 2018,38(4):388-390.
[1]苏为强,李云翔.重力铸造铝合金前副车架纵梁铸件[J].特种铸造及有色合金,2018,38(04):388-390. DOI： 10.15980/j.tzzz.2018.04.011.

Su Weiqiang, Li Yunxiang. Gravity Casting Aluminum Alloy Front Sub-frame Side Beam Casting[J]. Special Casting & Nonferrous Alloys, 2018,38(4):388-390. DOI： 10.15980/j.tzzz.2018.04.011.

摘要

对Al-7Si-0.3Mg铝合金中空结构前副车架纵梁铸件的结构进行优化设计

采用重力铸造生产纵梁铸件

并通过数值模拟技术调整优化工艺参数

使用探伤机、万能试验机等手段研究铸件内部品质及力学性能。结果表明

生产的纵梁铸件完全满足相关标准要求。

Abstract

Al-7 Si-0.3 Mg aluminum-alloy front sub-frames side beam with hollow structure was designed.Through optimizing the product structure design

gravity casting technology was adopted

and the process parameters were optimized by numerical simulation.In addition

internal quality and mechanical properties of the castings were analyzed by X-ray detector and universal tester.The results reveal that the gravity casting aluminum alloy sub-frame side beam casting can meet fully the standard requirement.