利用均衡凝固技术设计精密铸造三通件冒口

卢景秀; 魏胜辉; 张帆; 胡杰; 丁萌

doi:10.15980/j.tzzz.2018.01.014

精密铸造 | 浏览量 : 0 下载量: 92 CSCD: 1

导出
分享
收藏
专辑

利用均衡凝固技术设计精密铸造三通件冒口
Design and Application of Riser for Investment Casting Three Pass Castings Based on Proportional Solidification Technology
2018年38卷第1期页码：51-54
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.01.014

扫描看全文

[1]卢景秀,魏胜辉,张帆,胡杰,丁萌.利用均衡凝固技术设计精密铸造三通件冒口[J].特种铸造及有色合金,2018,38(01):51-54.

Lu Jingxiu, Wei Shenghui, Zhang Fan, et al. Design and Application of Riser for Investment Casting Three Pass Castings Based on Proportional Solidification Technology[J]. Special Casting & Nonferrous Alloys, 2018,38(1):51-54.
[1]卢景秀,魏胜辉,张帆,胡杰,丁萌.利用均衡凝固技术设计精密铸造三通件冒口[J].特种铸造及有色合金,2018,38(01):51-54. DOI： 10.15980/j.tzzz.2018.01.014.

Lu Jingxiu, Wei Shenghui, Zhang Fan, et al. Design and Application of Riser for Investment Casting Three Pass Castings Based on Proportional Solidification Technology[J]. Special Casting & Nonferrous Alloys, 2018,38(1):51-54. DOI： 10.15980/j.tzzz.2018.01.014.

摘要

运用均衡凝固技术对熔模铸造生产的不锈钢三通铸件进行了工艺设计

利用ProCast模拟软件进行模拟分析

得到该类铸件冒口偏离因数S与冒口和热节之间的模数比例k的关系。最终利用该关系对在生产的M03552件进行工艺设计。模拟结果表明

铸件缩孔、缩松缺陷消失

工艺出品率提高。

Abstract

By proportional solidification

process of investment casting stainless steel three-pass castings was designed.Meanwhile

simulation analysis for the process was carried out by the numerical software.The relationship between riser deviation factor S and modulus ratio k was presented.Design of the process of casting M03552 was performed based on the relationship.The simulated results reveal that the shrinkage porosities（holes）in the three-pass castings can be eliminated

and the yield production rate is increased.