The popular casting machine in the market belongs to four-beam type low pressure casting machine with small space for operation

so that it is very inconvenient for the sand core-setting

workpiecepushing and mold cleaning.For this reason

the cantilever low pressure casting machine was designed.The cantilever casting machine can unload the workpiece and install the sand core simultaneously

and eliminate the auxiliary device.Although the cantilever structure has many advantages

however

its stability is poor

and it is easy to be deformed.After calculation

the maximum force acting on the upper template was obtained.The proper dimensions of the cantilever and beam was designed according to the calculated data.Finally

the static analysis of the cantilever and the beam was carried out to ensure its theoretical feasibility.