基于有限差分法和光滑粒子法的镁合金充型模拟

阎佩雯; 王宝健; 王冠乾; 胡磊; 牛晓峰

doi:10.15980/j.tzzz.2018.01.010

计算机应用技术 | 浏览量 : 0 下载量: 109 CSCD: 1

导出
分享
收藏
专辑

基于有限差分法和光滑粒子法的镁合金充型模拟
Numerical Simulation of Filling Process of Medical Magnesium Alloy Plate Based on FDM and SPH
2018年38卷第1期页码：38-40
纸质出版日期： 2018 ，
DOI： 10.15980/j.tzzz.2018.01.010

扫描看全文

[1]阎佩雯,王宝健,王冠乾,胡磊,牛晓峰.基于有限差分法和光滑粒子法的镁合金充型模拟[J].特种铸造及有色合金,2018,38(01):38-40.

Yan Peiwen, Wang Baojian, Wang Guanqian, et al. Numerical Simulation of Filling Process of Medical Magnesium Alloy Plate Based on FDM and SPH[J]. Special Casting & Nonferrous Alloys, 2018,38(1):38-40.
[1]阎佩雯,王宝健,王冠乾,胡磊,牛晓峰.基于有限差分法和光滑粒子法的镁合金充型模拟[J].特种铸造及有色合金,2018,38(01):38-40. DOI： 10.15980/j.tzzz.2018.01.010.

Yan Peiwen, Wang Baojian, Wang Guanqian, et al. Numerical Simulation of Filling Process of Medical Magnesium Alloy Plate Based on FDM and SPH[J]. Special Casting & Nonferrous Alloys, 2018,38(1):38-40. DOI： 10.15980/j.tzzz.2018.01.010.

摘要

针对Benchmark件

采用有网格方法（FDM）和无网格方法（SPH）进行充型过程数值模拟

并将模拟结果与WinCast计算结果进行了比对

从而验证了两种方法的有效性和正确性。由于SPH方法可通过追踪粒子的运动得到整个物理系统的特性

无需采用专门方法确定自由表面

在数学模型上具有一定优势。

Abstract

Grid method（projection method）and meshless method（smoothed particle hydrodynamics method）were adopted to simulate filling process of the magnesium alloy plate.The simulated results were compared with that of Win-Cast.Effectiveness of the two methods was verified.Because the SPH method can obtain the entire physical system characteristics by tracking the motion of the particle

it is not require special methods to track the free surface

showing some advantages in the mathematical model.