人像反求与3D打印及其铸造实践

叶升平; 刘晖晖; 陈萌; 陈世辉; 王为钢; 胡文海

doi:10.15980/j.tzzz.2017.12.017

艺术铸造 | 浏览量 : 0 下载量: 171 CSCD: 1

导出
分享
收藏
专辑

人像反求与3D打印及其铸造实践
Reverse Solution of Image and 3D Printing as Well as the Practical Casting
2017年37卷第12期页码：1339-1341
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.12.017

扫描看全文

[1]叶升平,刘晖晖,陈萌,陈世辉,王为钢,胡文海.人像反求与3D打印及其铸造实践[J].特种铸造及有色合金,2017,37(12):1339-1341.

Ye Shengping, Liu Huihui, Chen Meng, et al. Reverse Solution of Image and 3D Printing as Well as the Practical Casting[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1339-1341.
[1]叶升平,刘晖晖,陈萌,陈世辉,王为钢,胡文海.人像反求与3D打印及其铸造实践[J].特种铸造及有色合金,2017,37(12):1339-1341. DOI： 10.15980/j.tzzz.2017.12.017.

Ye Shengping, Liu Huihui, Chen Meng, et al. Reverse Solution of Image and 3D Printing as Well as the Practical Casting[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1339-1341. DOI： 10.15980/j.tzzz.2017.12.017.

摘要

基于人像实体反求和人像照片反求

探索了熔融沉积制造快速成型和光固化快速成型以及3DP三维打印成型等3D打印方法。采用硅橡胶翻制工艺

将3D原型打印出蜡模。最后采用熔模铸造工艺铸造出人铜像。

Abstract

Based on reverse solution of 3 Dimage and people photo

SLS and RP as well as SDP forming technology were analyzed.Wax pattern was printed based on 3 Dprototype with silicone mould.And then the copper people image was produced by investment casting.