浅谈结构件高真空压铸模具关键技术及发展

王春涛; 史家辉; 沈波; 蒋金良; 张旺杰

doi:10.15980/j.tzzz.2017.12.014

压力铸造 | 浏览量 : 0 下载量: 186 CSCD: 1

导出
分享
收藏
专辑

浅谈结构件高真空压铸模具关键技术及发展
Key Technology and Development of High Pressure and High Vacuum Die Casting Al/Mg Automobile Body Structures
2017年37卷第12期页码：1327-1328
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.12.014

扫描看全文

[1]王春涛,史家辉,沈波,蒋金良,张旺杰.浅谈结构件高真空压铸模具关键技术及发展[J].特种铸造及有色合金,2017,37(12):1327-1328.

Wang Chuntao, Shi Jiahui, Shen Bo, et al. Key Technology and Development of High Pressure and High Vacuum Die Casting Al/Mg Automobile Body Structures[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1327-1328.
[1]王春涛,史家辉,沈波,蒋金良,张旺杰.浅谈结构件高真空压铸模具关键技术及发展[J].特种铸造及有色合金,2017,37(12):1327-1328. DOI： 10.15980/j.tzzz.2017.12.014.

Wang Chuntao, Shi Jiahui, Shen Bo, et al. Key Technology and Development of High Pressure and High Vacuum Die Casting Al/Mg Automobile Body Structures[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1327-1328. DOI： 10.15980/j.tzzz.2017.12.014.

摘要

主要介绍了车身结构件的成形发展及趋势

以及其生产制造的影响因素。着重介绍了在高真空铝镁合金车身结构件压铸模具的开发设计中的关键因素

如浇注系统设计、模具温度控制设计、真空结构设计等。

Abstract

The development and trend of automobile body structures were described.And the factors affecting the production quality were also discussed.And key points for the die design of high vacuum die casting Al-Mg alloy structure parts were introduced

such as gating system design

die temperature control and high vacuum structure design.

关键词

车身结构件高真空压铸密封设计模具温度控制系统

Keywords

Body StructureHigh Vacuum HPDCSealing DesignDie Temperature Control Design

references

文章被引用时，请邮件提醒。

提交

暂无数据