Mg-Al-Li合金的机械合金化制备及储氢性能

黄显吞; 李柳杰; 谢政专

doi:10.15980/j.tzzz.2017.12.005

实用研究 | 浏览量 : 0 下载量: 152 CSCD: 1

导出
分享
收藏
专辑

Mg-Al-Li合金的机械合金化制备及储氢性能
Preparation of Mg-Al-Li Alloy Prepared by Mechanical Milling and Its Hydrogen Storage Performance
2017年37卷第12期页码：1294-1297
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.12.005

扫描看全文

[1]黄显吞,李柳杰,谢政专.Mg-Al-Li合金的机械合金化制备及储氢性能[J].特种铸造及有色合金,2017,37(12):1294-1297.

Huang Xiantun, Li Liujie, Xie Zhengzhuan. Preparation of Mg-Al-Li Alloy Prepared by Mechanical Milling and Its Hydrogen Storage Performance[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1294-1297.
[1]黄显吞,李柳杰,谢政专.Mg-Al-Li合金的机械合金化制备及储氢性能[J].特种铸造及有色合金,2017,37(12):1294-1297. DOI： 10.15980/j.tzzz.2017.12.005.

Huang Xiantun, Li Liujie, Xie Zhengzhuan. Preparation of Mg-Al-Li Alloy Prepared by Mechanical Milling and Its Hydrogen Storage Performance[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1294-1297. DOI： 10.15980/j.tzzz.2017.12.005.

摘要

在氩气保护下

采用机械球磨合金化法制备Mg-Al-Li合金材料

对合金材料的组织、吸放氢动力学以及热力学性能进行了表征。结果表明

机械球磨合金化法工艺虽然不能改变合金的相结构

但适当的机械球磨处理可以改善Mg-Al-Li合金材料的储氢性能。当球磨时间为60h时

合金材料的氢化量以及氢化/脱氢动力学与热力学性能均达到最佳。

Abstract

The Mg-Al-Li alloy hydrogen storage materials were synthesized by mechanical milling

and the mechanical milling effect on the hydrogen storage properties of Mg-Al-Li alloy were analyzed.The XRD analysis shows that although the mechanical milling can’t change the structure of Mg-Al-Li alloy

the appropriate time of mechanical milling can improve hydrogen storage properties.With mechanical milling of 60 h

the hydrogen absorption/desorption kinetic properties and thermodynamic performance for Mg-Al-Li alloy exhibit desirable.