42CrMo铸造环坯高温拉伸性能

武永红; 李永堂; 齐会萍

doi:10.15980/j.tzzz.2017.12.003

试验研究 | 浏览量 : 0 下载量: 99 CSCD: 2

导出
分享
收藏
专辑

42CrMo铸造环坯高温拉伸性能
High Temperature Tensile Perforamnce of 42CrMo Casting Ring Blank
2017年37卷第12期页码：1288-1291
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.12.003

扫描看全文

[1]武永红,李永堂,齐会萍.42CrMo铸造环坯高温拉伸性能[J].特种铸造及有色合金,2017,37(12):1288-1291.

Wu Yonghong, Li Yongtang, Qi Huiping. High Temperature Tensile Perforamnce of 42CrMo Casting Ring Blank[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1288-1291.
[1]武永红,李永堂,齐会萍.42CrMo铸造环坯高温拉伸性能[J].特种铸造及有色合金,2017,37(12):1288-1291. DOI： 10.15980/j.tzzz.2017.12.003.

Wu Yonghong, Li Yongtang, Qi Huiping. High Temperature Tensile Perforamnce of 42CrMo Casting Ring Blank[J]. Special Casting & Nonferrous Alloys, 2017,37(12):1288-1291. DOI： 10.15980/j.tzzz.2017.12.003.

摘要

以常用轴承材料42CrMo钢为研究对象

采用Gleeble-3500热力试验模拟机

通过高温拉伸试验

分析了铸造42CrMo钢的高温拉伸力学性能。建立了抗拉强度模型

并验证了模型的准确性;计算了硬化系数和应变速率敏感系数。结果表明

铸造42CrMo钢的硬化系数随加热温度升高而减小

随应变速率增大而增大。应变速率敏感系数则随温度升高而增大

随应变速率增加而减小。

Abstract

The high temperature mechanical properties of cast 42 CrMo steel that commonly used in bearings were investigated by high temperature tensile testing on Gleeble-3500 thermal simulator.The tensile strength model was established and the accuracy of the model was verified.Meanwhile

the hardening coefficient and strain rate sensitivity coefficient were calculated.The results reveal that the hardening coefficient of cast 42 CrMo steel is decreased with the increase of heating temperature

and increased with the increase of strain rate.The sensitivity coefficient of strain rate is increased with the increase of temperature and decreased with the increase of strain rate.