熔模铸造止回板平面鼓胀缺陷成因分析及对策

冯柳; 周李明; 赵而团

doi:10.15980/j.tzzz.2017.10.017

精密铸造 | 浏览量 : 0 下载量: 67 CSCD: 1

导出
分享
收藏
专辑

熔模铸造止回板平面鼓胀缺陷成因分析及对策
Analysis and Countermeasures of Bulge Defect in an Investment Casting Check Valve Baffle
2017年37卷第10期页码：1102-1103
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.10.017

扫描看全文

[1]冯柳,周李明,赵而团.熔模铸造止回板平面鼓胀缺陷成因分析及对策[J].特种铸造及有色合金,2017,37(10):1102-1103.

Feng Liu, Zhou Liming, Zhao Ertuan. Analysis and Countermeasures of Bulge Defect in an Investment Casting Check Valve Baffle[J]. Special Casting & Nonferrous Alloys, 2017,37(10):1102-1103.
[1]冯柳,周李明,赵而团.熔模铸造止回板平面鼓胀缺陷成因分析及对策[J].特种铸造及有色合金,2017,37(10):1102-1103. DOI： 10.15980/j.tzzz.2017.10.017.

Feng Liu, Zhou Liming, Zhao Ertuan. Analysis and Countermeasures of Bulge Defect in an Investment Casting Check Valve Baffle[J]. Special Casting & Nonferrous Alloys, 2017,37(10):1102-1103. DOI： 10.15980/j.tzzz.2017.10.017.

摘要

针对止回板铸件出现的平面鼓胀问题

分析了其产生的原因

发现造成缺陷的主要原因在于制壳过程中大平面型壳的鼓胀

以及浇注过程中型壳受高温熔体作用产生的鼓胀变形。针对缺陷产生原因

分别在蜡模大平面上插不锈钢丝

形成工艺凸起

以及在浇注过程中采用专用工装夹持

有效的避免了该缺陷的发生。

Abstract

The origination of forming bulge defect in the investment casting check valve baffle was analyzed.The main cause of the defect is attributed to the bulge of large plane shell during molding and pouring process.Through inserting stainless steel wire in the wax pattern plane to form technological concave

and adopting special clamping fixture during pouring process

the bulge defects can be eliminated effectively.