基于数值模拟的铝合金冷却模块的压铸工艺开发

汪学阳; 黄志垣; 陈振宇

doi:10.15980/j.tzzz.2017.10.010

压力铸造 | 浏览量 : 0 下载量: 65 CSCD: 1

导出
分享
收藏
专辑

基于数值模拟的铝合金冷却模块的压铸工艺开发
Technology Development of Die Casting Aluminum Cooling Module based on Numerical Simulation
2017年37卷第10期页码：1078-1080
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.10.010

扫描看全文

[1]汪学阳,黄志垣,陈振宇.基于数值模拟的铝合金冷却模块的压铸工艺开发[J].特种铸造及有色合金,2017,37(10):1078-1080.

Wang Xueyang, Huang Zhiyuan, Chen Zhenyu. Technology Development of Die Casting Aluminum Cooling Module based on Numerical Simulation[J]. Special Casting & Nonferrous Alloys, 2017,37(10):1078-1080.
[1]汪学阳,黄志垣,陈振宇.基于数值模拟的铝合金冷却模块的压铸工艺开发[J].特种铸造及有色合金,2017,37(10):1078-1080. DOI： 10.15980/j.tzzz.2017.10.010.

Wang Xueyang, Huang Zhiyuan, Chen Zhenyu. Technology Development of Die Casting Aluminum Cooling Module based on Numerical Simulation[J]. Special Casting & Nonferrous Alloys, 2017,37(10):1078-1080. DOI： 10.15980/j.tzzz.2017.10.010.

摘要

基于数值模拟对某汽车冷却模块的压铸工艺方案进行了分析和对比

以优先保证重要区域品质为目标

确定了优化方案。结果表明

借助Magma软件模拟分析确定的工艺方案来进行试生产

发现产品品质稳定、可靠

符合技术要求

实现一次试制成功

减少了因方案不合理而导致的后期多次试制及调整

缩短了开发周期。

Abstract

The technology of die casting aluminum cooling module was analyzed and compared based on numerical simulation.The optimized HPDC process was determined based on the better quality of important zone as project.After the trail production

the high-quality die castings can be produced sucessfully.The result shows that the numerical simulation method can reduce the time of trial-production

shortening the development period.