内热式多级连续真空炉稳态温度场研究

雷金辉; 付彤; 陈焰

doi:10.15980/j.tzzz.2017.07.006

计算机应用技术 | 浏览量 : 0 下载量: 111 CSCD: 4

导出
分享
收藏
专辑

内热式多级连续真空炉稳态温度场研究
Modeling of Steady Temperature Field of Multistage Continuous Heat-type Vacuum Furnace
2017年37卷第7期页码：715-718
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.07.006

扫描看全文

[1]雷金辉,付彤,陈焰.内热式多级连续真空炉稳态温度场研究[J].特种铸造及有色合金,2017,37(07):715-718.

Lei Jinhui, Fu Tong, Chen Yan. Modeling of Steady Temperature Field of Multistage Continuous Heat-type Vacuum Furnace[J]. Special Casting & Nonferrous Alloys, 2017,37(7):715-718.
[1]雷金辉,付彤,陈焰.内热式多级连续真空炉稳态温度场研究[J].特种铸造及有色合金,2017,37(07):715-718. DOI： 10.15980/j.tzzz.2017.07.006.

Lei Jinhui, Fu Tong, Chen Yan. Modeling of Steady Temperature Field of Multistage Continuous Heat-type Vacuum Furnace[J]. Special Casting & Nonferrous Alloys, 2017,37(7):715-718. DOI： 10.15980/j.tzzz.2017.07.006.

摘要

采用有限元分析算法

对内热式多级连续真空炉内部温度分布

温度传递进行研究

作为建模研究的理论基础。应用ANSYS软件对真空炉在处于稳态温度场（保温状态）时进行仿真建模

获得真空炉炉膛内的稳态温度分布图并输出特殊节点的模拟温度值作为理论建模数据。通过测量真空炉内部特殊节点温度

提取实测数据

与仿真温度值进行对比分析。结果表明

该建模模型的误差低于3.6%。

Abstract

By using the finite element analysis method

temperature distribution and the heat transfer in the internal heating type multistage continuous vacuum furnace were analyzed as the theoretical basis for establishing the modeling.The ANSYS software was adopted to simulate the steady temperature field in vacuum furnace to obtain temperature distribution diagram of vacuum furnace and output value of the special nodes as theoretical modeling data.By measuring temperature of the special nodes in the vacuum furnace

the experimental data was extracted and compared with the simulated ones.The results show that the error of the model is less than 3.6%.