A356铝合金强冷制浆工艺影响因素的研究

段蒙; 张文欣; 程谨轩; 蔡荣更; 李学文; 李松; 郑志强

doi:10.15980/j.tzzz.2017.05.012

半固态加工 | 浏览量 : 0 下载量: 62 CSCD: 0

导出
分享
收藏
专辑

A356铝合金强冷制浆工艺影响因素的研究
Processing Factors of Fabricating Semi-solid Slurry by Forced Cooling
2017年37卷第5期页码：504-506
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.05.012

扫描看全文

[1]段蒙,张文欣,程谨轩,蔡荣更,李学文,李松,郑志强.A356铝合金强冷制浆工艺影响因素的研究[J].特种铸造及有色合金,2017,37(05):504-506.

Duan Meng, Zhang Wenxin, Cheng Jinxuan, et al. Processing Factors of Fabricating Semi-solid Slurry by Forced Cooling[J]. Special Casting & Nonferrous Alloys, 2017,37(5):504-506.
[1]段蒙,张文欣,程谨轩,蔡荣更,李学文,李松,郑志强.A356铝合金强冷制浆工艺影响因素的研究[J].特种铸造及有色合金,2017,37(05):504-506. DOI： 10.15980/j.tzzz.2017.05.012.

Duan Meng, Zhang Wenxin, Cheng Jinxuan, et al. Processing Factors of Fabricating Semi-solid Slurry by Forced Cooling[J]. Special Casting & Nonferrous Alloys, 2017,37(5):504-506. DOI： 10.15980/j.tzzz.2017.05.012.

摘要

研究了冷却管的尺寸、材质

合金熔体的温度、流速

冷却水的温度、流速等因素对强冷制备A356铝合金半固态浆料的影响。结果表明

在其他影响因素不变的条件下

浇注温度由620℃升高至630℃时

单位时间内传导的热量增大了1.03倍;冷却水的流速由3L/min提高至4L/min时

单位时间内传导的热量增大了1.2倍;冷却管的材质由钢管换成Cu管时

单位时间内传导的热量增大了7倍。

Abstract

In the process of fabricating semi-solid slurry by strong cooling

thermal energy of the alloy melt transferring to the cooling water is controlled mainly by heat conduction

such as the materials and size of cooling pipe

the temperature and flow velocity of alloy melt as well as the flow rate and temperature of cooling water.The experimental results show that at the fixed other conditions

when the pouring temperature is increased from 620 ℃ to 630 ℃

the transfer thermal energy is increased by 1.03 times

and the flow rate of cooling water is increased from 3L/min to 4L/min

it is increased by 1.2times

while steel tube is substituted for copper tube

it is increased by 7times.