基于VB的压铸机与模具及压铸工艺关系的研究

杨华忠

doi:10.15980/j.tzzz.2017.05.011

压力铸造 | 浏览量 : 0 下载量: 48 CSCD: 0

导出
分享
收藏
专辑

基于VB的压铸机与模具及压铸工艺关系的研究
Relationship of Die Casting Machine and Die Casting Mould as Well as Die Casting Process Based on VB Platform
2017年37卷第5期页码：501-504
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.05.011

扫描看全文

[1]杨华忠.基于VB的压铸机与模具及压铸工艺关系的研究[J].特种铸造及有色合金,2017,37(05):501-504.

Yang Huazhong. Relationship of Die Casting Machine and Die Casting Mould as Well as Die Casting Process Based on VB Platform[J]. Special Casting & Nonferrous Alloys, 2017,37(5):501-504.
[1]杨华忠.基于VB的压铸机与模具及压铸工艺关系的研究[J].特种铸造及有色合金,2017,37(05):501-504. DOI： 10.15980/j.tzzz.2017.05.011.

Yang Huazhong. Relationship of Die Casting Machine and Die Casting Mould as Well as Die Casting Process Based on VB Platform[J]. Special Casting & Nonferrous Alloys, 2017,37(5):501-504. DOI： 10.15980/j.tzzz.2017.05.011.

摘要

针对压铸生产中出现的飞边、缩孔、缩松

浇不足等铸件缺陷

以分析压铸机与压铸模具及压铸工艺的关系为切入点

运用流体力学原理解释金属液压力与流量的关系（p-Q图）。根据软件工程学思想

结合VB编程语言

开发了可迅速确定解决方案的模块。

Abstract

Aiming at casting defects in die casting

such as shrinkage depression

porosity

flashes

shrinkage cavity and misrun

relationship of die casting machine and die casting mould as well as die casting process was analyzed.The relation of liquid metal pressure and flow volume was described by fluid mechanics（p-Q diagram）.By means of the software engineering philosophy

combining with the VB programming language

a module that could rapidly determine the solutions was developed.