AZ31镁合金铸管成形温度场的有限元分析

杨晶晶; 唐显升; 谢江怀; 莫玉梅

doi:10.15980/j.tzzz.2017.05.006

计算机应用技术 | 浏览量 : 0 下载量: 105 CSCD: 1

导出
分享
收藏
专辑

AZ31镁合金铸管成形温度场的有限元分析
Analysis of Rolling Temperature Field in AZ31 Magnesium Alloy Cast Tube Based on the Finite Element Method
2017年37卷第5期页码：485-487
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.05.006

扫描看全文

[1]杨晶晶,唐显升,谢江怀,莫玉梅.AZ31镁合金铸管成形温度场的有限元分析[J].特种铸造及有色合金,2017,37(05):485-487.

Yang Jingjing, Tang Xiansheng, Xie Jianghuai, et al. Analysis of Rolling Temperature Field in AZ31 Magnesium Alloy Cast Tube Based on the Finite Element Method[J]. Special Casting & Nonferrous Alloys, 2017,37(5):485-487.
[1]杨晶晶,唐显升,谢江怀,莫玉梅.AZ31镁合金铸管成形温度场的有限元分析[J].特种铸造及有色合金,2017,37(05):485-487. DOI： 10.15980/j.tzzz.2017.05.006.

Yang Jingjing, Tang Xiansheng, Xie Jianghuai, et al. Analysis of Rolling Temperature Field in AZ31 Magnesium Alloy Cast Tube Based on the Finite Element Method[J]. Special Casting & Nonferrous Alloys, 2017,37(5):485-487. DOI： 10.15980/j.tzzz.2017.05.006.

摘要

利用有限元软件对AZ31镁合金管材进行了轧制热力耦合数值模拟

并分析了不同压下量对温度场变化的影响

通过分析金属流动变化验证了模型的准确性。结果表明

随着压下量增加

辊顶的温度不断升高

辊缝温度单调减小

辊顶和辊缝的温度差会随着压下量的增加而增大

金属流动性能也会随之增强

并通过试验进行了验证。

Abstract

Thermal-mechanical coupling numerical simulation was performed for rolling AZ31 magnesium alloy tubes based on finite element method to analyze influence of varied reduction on the temperature field.The availability of the model was verified by analysis of metal flow change.The results show that with the increase of reduction

temperature on the top of roller is increased monotonously

while temperature of roller gap is decreased monotonously

so temperature difference of roller top and roller gap is increased with the increase of reduction

and metal flow performance also can be increased accordingly.The simulated results were verified by the experimentones.