铸造过程数值模拟关键技术研究及软件开发

杨曼云; 迟毅林

doi:10.15980/j.tzzz.2017.04.010

计算机应用技术 | 浏览量 : 0 下载量: 188 CSCD: 2

导出
分享
收藏
专辑

铸造过程数值模拟关键技术研究及软件开发
Research of Numerical Simulation of Casting Technology and Software Development
2017年37卷第4期页码：383-386
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.04.010

扫描看全文

[1]杨曼云,迟毅林.铸造过程数值模拟关键技术研究及软件开发[J].特种铸造及有色合金,2017,37(04):383-386.

Yang Manyun, Chi Yilin. Research of Numerical Simulation of Casting Technology and Software Development[J]. Special Casting & Nonferrous Alloys, 2017,37(4):383-386.
[1]杨曼云,迟毅林.铸造过程数值模拟关键技术研究及软件开发[J].特种铸造及有色合金,2017,37(04):383-386. DOI： 10.15980/j.tzzz.2017.04.010.

Yang Manyun, Chi Yilin. Research of Numerical Simulation of Casting Technology and Software Development[J]. Special Casting & Nonferrous Alloys, 2017,37(4):383-386. DOI： 10.15980/j.tzzz.2017.04.010.

摘要

对铸造过程数值模拟关键技术进行了研究并进行SIMU-CAST铸造凝固过程模拟软件开发

软件能基于有限单元法进行凝固过程温度场

缩孔、缩松等铸造缺陷的数值模拟。模拟过程充分考虑材料和边界条件等参数的非线性特征

并考虑结晶潜热的处理。最后对所开发软件计算的铸件凝固过程情况和ProCAST软件计算结果进行对比

并结合试验结果进行分析

发现软件计算结果准确性及计算精度较高

铸件缩孔、缩松预测结果基本准确

能满足工程实际应用要求。

Abstract

Some key technologies for numerical simulation in casting were analyzed

and the SIMU-CAST software was developed.The software has the function of solidification field and prediction of shrinkage porosities during casting process based on FEM method

in which non-leaner features of materials and boundary conditions as well as latent heat were taken into account.The simulated results from SIMUCAST were verified by ProCAST and experiment.The results reveal that the developed software exhibits the high accuracy in calculation and simulation

meanwhile

prediction of shrinkage porosities is well agreement with the practical ones

meeting the industrial application.