β-Mg---<sub>17</sub>Al<sub>12</sub>相对轧制态AZ80镁合金组织和性能的影响

张路; 房灿峰; 刘晓滕; 郝海; 张兴国

doi:10.15980/j.tzzz.2017.04.006

实用研究 | 浏览量 : 0 下载量: 196 CSCD: 2

导出
分享
收藏
专辑

β-Mg---₁₇Al₁₂相对轧制态AZ80镁合金组织和性能的影响
Effects of β-Mg₁₇Al₁₂ Morphology on Microstructure and Mechanical Properties of As-rolled AZ80 Alloy
2017年37卷第4期页码：369-372
纸质出版日期： 2017 ，
DOI： 10.15980/j.tzzz.2017.04.006

扫描看全文

[1]张路,房灿峰,刘晓滕,郝海,张兴国.β-Mg---_(17)Al_(12)相对轧制态AZ80镁合金组织和性能的影响[J].特种铸造及有色合金,2017,37(04):369-372.

Effects of β-Mg₁₇Al₁₂ Morphology on Microstructure and Mechanical Properties of As-rolled AZ80 Alloy[J]. Special Casting & Nonferrous Alloys, 2017,37(4):369-372.
[1]张路,房灿峰,刘晓滕,郝海,张兴国.β-Mg---_(17)Al_(12)相对轧制态AZ80镁合金组织和性能的影响[J].特种铸造及有色合金,2017,37(04):369-372. DOI： 10.15980/j.tzzz.2017.04.006.

Effects of β-Mg₁₇Al₁₂ Morphology on Microstructure and Mechanical Properties of As-rolled AZ80 Alloy[J]. Special Casting & Nonferrous Alloys, 2017,37(4):369-372. DOI： 10.15980/j.tzzz.2017.04.006.

摘要

通过调整均匀化时长

在AZ80镁合金中获得了具有不同分布特征的β-Mg17Al12相。利用金相显微镜、扫描电镜等分析手段

研究了β相分布特征对AZ80镁合金轧制态组织和性能的影响。研究发现

β相尺寸、形貌以及分布与AZ80镁合金轧制组织中动态再结晶行为密切相关。晶界粗大的β相利于动态再结晶的发生

并形成细晶带;而β相主要以弥散细小的颗粒在晶内存在时

细晶带发育不完全

使得许多原始晶粒形成孪晶以协调变形。在420℃下保温12h的均匀化处理更利于提高AZ80镁合金板材的综合力学性能。

Abstract

β-Mg17Al12 phases with various distribution features in AZ80 alloy were observed by homogenizing treatment at 420 ℃ for different time.The effects ofβphase on microstructure and mechanical properties of as-rolled AZ80 alloy were investigated by metallography microscopy

scanning electron microscopy（SEM）and tensile tests.The results show that the size

morphology and distribution ofβphase are closely related with the dynamic recrystallization behavior during hot rolling process.Coarseβphase distributed along the grain boundaries can promote dynamic recrystallization and enhance the formation of fine grain band.However

when most ofβphases are tiny and distributed just in grain interiors dispersedly

fine grain bands become uncompleted and twinning happens in some initial grain interiors.The desirable comprehensive mechanical properties of as-rolled AZ80 alloy can be presented by homogenizing at 420 ℃for 12 h.