一种镂空薄壁ZTC4框架的熔模铸造工艺研究

司永超; 黄东; 魏战雷; 余龙; 崔新鹏; 南海

doi:10.15980/j.tzzz.2016.12.017

精密铸造 | 浏览量 : 0 下载量: 81 CSCD: 0

导出
分享
收藏
专辑

一种镂空薄壁ZTC4框架的熔模铸造工艺研究
Investment Casting Process of a Hollow and Thin-walled ZTC4 Framework
2016年36卷第12期页码：1302-1304
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.12.017

扫描看全文

[1]司永超,黄东,魏战雷,余龙,崔新鹏,南海.一种镂空薄壁ZTC4框架的熔模铸造工艺研究[J].特种铸造及有色合金,2016,36(12):1302-1304.

Si Yongchao, Huang Dong, Wei Zhanlei, et al. Investment Casting Process of a Hollow and Thin-walled ZTC4 Framework[J]. Special Casting & Nonferrous Alloys, 2016,36(12):1302-1304.
[1]司永超,黄东,魏战雷,余龙,崔新鹏,南海.一种镂空薄壁ZTC4框架的熔模铸造工艺研究[J].特种铸造及有色合金,2016,36(12):1302-1304. DOI： 10.15980/j.tzzz.2016.12.017.

Si Yongchao, Huang Dong, Wei Zhanlei, et al. Investment Casting Process of a Hollow and Thin-walled ZTC4 Framework[J]. Special Casting & Nonferrous Alloys, 2016,36(12):1302-1304. DOI： 10.15980/j.tzzz.2016.12.017.

摘要

研究了一种镂空薄壁环状ZTC4框架的熔模铸造工艺。铸件轮廓尺寸为φ345 mm×150 mm

最小壁厚为2.5mm

环面为菱形镂空结构。利用华铸CAE软件对该铸件充型过程中的温度场及缩孔、缩松分布进行了数值模拟

并根据模拟结果优化了浇注系统

进行了铸件生产

得到了质量合格的铸件。

Abstract

The investment casting process for a hollow

thin-walled and circular ZTC4 framework with345mm in diameter and 150 mm in length and hollow structure was analyzed.The temperature field during metal filling and solidification process and the distribution of shrinkage porosities in the framework were simulated by Huazhu CAE software.According to the simulated results

gating system was optimized

and a qualified framework was produced.