ZL114A铝合金盘条连铸连轧成形研究

王东; 乔波; 张登峰; 刘春兰; 高世鹰; 邬富宝; 郑宏伟; 李庭; 吕文利; 张世全

doi:10.15980/j.tzzz.2016.11.017

连续铸造 | 浏览量 : 0 下载量: 106 CSCD: 2

导出
分享
收藏
专辑

ZL114A铝合金盘条连铸连轧成形研究
Research on Continuous Casting-rolling Forming of ZL114A Aluminum Alloy Rod
2016年36卷第11期页码：1178-1181
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.11.017

扫描看全文

[1]王东,乔波,张登峰,刘春兰,高世鹰,邬富宝,郑宏伟,李庭,吕文利,张世全.ZL114A铝合金盘条连铸连轧成形研究[J].特种铸造及有色合金,2016,36(11):1178-1181.

Wang Dong, Qiao Bo, Zhang Dengfeng, et al. Research on Continuous Casting-rolling Forming of ZL114A Aluminum Alloy Rod[J]. Special Casting & Nonferrous Alloys, 2016,36(11):1178-1181.
[1]王东,乔波,张登峰,刘春兰,高世鹰,邬富宝,郑宏伟,李庭,吕文利,张世全.ZL114A铝合金盘条连铸连轧成形研究[J].特种铸造及有色合金,2016,36(11):1178-1181. DOI： 10.15980/j.tzzz.2016.11.017.

Wang Dong, Qiao Bo, Zhang Dengfeng, et al. Research on Continuous Casting-rolling Forming of ZL114A Aluminum Alloy Rod[J]. Special Casting & Nonferrous Alloys, 2016,36(11):1178-1181. DOI： 10.15980/j.tzzz.2016.11.017.

摘要

分析并建立了ZL114A铝合金盘条连铸连轧工艺。线材组织分析表明

线材边部晶粒尺寸明显小于心部晶粒尺寸。随着轧制的进行

线材横截面心部晶粒逐渐细化

纵截面晶粒沿变形方向逐渐被拉长

第二相的分布也由沿晶界分布变为沿变形方向分布。焊接试验结果表明

ZL114A铝合金连铸连轧工艺可以用于焊丝坯料的生产。

Abstract

A continuous casting and rolling process of ZL114 Aaluminum alloy wire rod was established.Microstructure analysis of wire shows that the grain size of the edge of the wire is the smaller than the size of the core.With the rolling process

the core grain size of the cross-section of the wire is refined gradually

and the grain of longitudinal section is elongated along the deformation direction

meanwhile

distribution of the second phase is also changed from distribution along grain boundaries to distribution along the deformation direction.Welding test reveals that continuous casting-rolling technology can be used in the production of welding wire blank.