钛合金复杂薄壁结构件精密铸造工艺研究

范李鹏; 王宝兵; 余国康; 李宝辉; 谢剑锋; 顾辉旺; 杨剑

doi:10.15980/j.tzzz.2016.10.020

精密铸造 | 浏览量 : 0 下载量: 248 CSCD: 4

导出
分享
收藏
专辑

钛合金复杂薄壁结构件精密铸造工艺研究
Investment Casting Titanium Components with Complex Thin-walled Structure
2016年36卷第10期页码：1079-1081
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.10.020

扫描看全文

[1]范李鹏,王宝兵,余国康,李宝辉,谢剑锋,顾辉旺,杨剑.钛合金复杂薄壁结构件精密铸造工艺研究[J].特种铸造及有色合金,2016,36(10):1079-1081.

Fan Lipeng, Wang Baobing, Yu Guokang, et al. Investment Casting Titanium Components with Complex Thin-walled Structure[J]. Special Casting & Nonferrous Alloys, 2016,36(10):1079-1081.
[1]范李鹏,王宝兵,余国康,李宝辉,谢剑锋,顾辉旺,杨剑.钛合金复杂薄壁结构件精密铸造工艺研究[J].特种铸造及有色合金,2016,36(10):1079-1081. DOI： 10.15980/j.tzzz.2016.10.020.

Fan Lipeng, Wang Baobing, Yu Guokang, et al. Investment Casting Titanium Components with Complex Thin-walled Structure[J]. Special Casting & Nonferrous Alloys, 2016,36(10):1079-1081. DOI： 10.15980/j.tzzz.2016.10.020.

摘要

根据复杂薄壁结构件的精密铸造成型理论

对ZTA15中空法兰结构及其铸造难点进行了分析

从铸造工艺设计、数值模拟仿真以及工艺优化3个方面进行了研究。结果表明

通过模拟仿真提前预测了缺陷位置和类型

通过优化铸造工艺显著减少了铸件中上、下法兰处缩松、气孔等缺陷

提高了铸件的质量

获得了优质钛合金精铸件。

Abstract

According to the forming theory of investment castings with complex thin-walled structure

ZTA15 hollow flange structure and casting difficulties were analyzed.The design of casting process

numerical simulation and process optimization were carried out.The results show that the simulated results can predict the location and type of defects

and shrinkage porosities（gas holes）in the upper and lower flange casting can be reduced significantly through the optimization of casting process.High-quality titanium alloy castings were obtained by improving the quality.