电动汽车套管件挤压铸造模具设计及应用

张月品; 符莹; 任川东; 罗浩

doi:10.15980/j.tzzz.2016.08.014

压力铸造 | 浏览量 : 0 下载量: 55 CSCD: 1

导出
分享
收藏
专辑

电动汽车套管件挤压铸造模具设计及应用
Design and Application of Squeezing Casting Mould of Sleeve-Inserted-Pipe for Electric-Drive Automobile
2016年36卷第8期页码：833-834
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.08.014

扫描看全文

[1]张月品,符莹,任川东,罗浩.电动汽车套管件挤压铸造模具设计及应用[J].特种铸造及有色合金,2016,36(08):833-834.

Zhang Yuepin, Fu Ying, Ren Chuandong, et al. Design and Application of Squeezing Casting Mould of Sleeve-Inserted-Pipe for Electric-Drive Automobile[J]. Special Casting & Nonferrous Alloys, 2016,36(8):833-834.
[1]张月品,符莹,任川东,罗浩.电动汽车套管件挤压铸造模具设计及应用[J].特种铸造及有色合金,2016,36(08):833-834. DOI： 10.15980/j.tzzz.2016.08.014.

Zhang Yuepin, Fu Ying, Ren Chuandong, et al. Design and Application of Squeezing Casting Mould of Sleeve-Inserted-Pipe for Electric-Drive Automobile[J]. Special Casting & Nonferrous Alloys, 2016,36(8):833-834. DOI： 10.15980/j.tzzz.2016.08.014.

摘要

介绍了挤压铸造套管的生产工艺过程和模具结构特点

给出了生产套管的相关参数。结果表明

用挤压铸造工艺生产汽车套管技术上是可行的

成形后的套管尺寸精确

外形美观。经X光检测

内部没有缩孔、缩松等缺陷

产品质量完全达到技术要求。用该模具生产套管效率高

产品质量稳定。

Abstract

The process and mould structure of squeezing casting sleeve-inserted-pipe were introduced

and processing parameters were presented.The results reveal that it is feasible for producing sleeve-insertedpipe for electric-drive automobile by squeezing casting.The sleeve-inserted-pipe produced exhibits accuracy size and appearance with absence of shrinkage porosity（holes）by X-ray detection

meeting the technological requirement in quality.Meanwhile

the mould shows high efficiency and stable production quality.