Cu-Co-Si-Zr合金的固溶时效处理

陈亿; 戴安伦; 朱治愿

doi:10.15980/j.tzzz.2016.07.032

重有色合金 | 浏览量 : 0 下载量: 102 CSCD: 1

导出
分享
收藏
专辑

Cu-Co-Si-Zr合金的固溶时效处理
Solution and Aging Treatment of Cu-Co-Si-Zr Alloy
2016年36卷第7期页码：781-784
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.07.032

扫描看全文

[1]陈亿,戴安伦,朱治愿.Cu-Co-Si-Zr合金的固溶时效处理[J].特种铸造及有色合金,2016,36(07):781-784.

Chen Yi, Dai Anlun, Zhu Zhiyuan. Solution and Aging Treatment of Cu-Co-Si-Zr Alloy[J]. Special Casting & Nonferrous Alloys, 2016,36(7):781-784.
[1]陈亿,戴安伦,朱治愿.Cu-Co-Si-Zr合金的固溶时效处理[J].特种铸造及有色合金,2016,36(07):781-784. DOI： 10.15980/j.tzzz.2016.07.032.

Chen Yi, Dai Anlun, Zhu Zhiyuan. Solution and Aging Treatment of Cu-Co-Si-Zr Alloy[J]. Special Casting & Nonferrous Alloys, 2016,36(7):781-784. DOI： 10.15980/j.tzzz.2016.07.032.

摘要

采用真空熔炼工艺制备了引线框架材料Cu-Co-Si-Zr合金

对合金进行了金相组织观察、力学性能测试、电导率测试

研究了不同的热处理条件对该合金的组织和性能的影响。结果表明

该合金有明显的时效强化特性

最佳的热处理工艺为980℃×2h固溶+510℃×3h时效

合金的电导率和硬度（HB）分别为27.78 MS/m和198.2。

Abstract

Effects of different heat treatments on microstructure and properties of Cu-Co-Si-Zr frame alloy prepared by vacuum melting condition were investigated by hardness tester

electric conductivity and tensile testing

metallograph.The results show that the characteristics of aging strengthening exists in the alloy obviously.The electrical conductivity and hardness can reach 27.78MS/m and 198.2HB

respectively

with aging at 510 ℃for 3hand solid solution at 980 ℃for 2h.