椭圆管型铸铁冷却壁热态试验分析

郭光胜; 张建良; 焦克新; 沈猛; 铁金艳

doi:10.15980/j.tzzz.2016.07.012

计算机应用技术 | 浏览量 : 0 下载量: 54 CSCD: 0

导出
分享
收藏
专辑

椭圆管型铸铁冷却壁热态试验分析
Analysis of Thermal Test of Elliptic Water Pipes Cast Iron Cooling Stave
2016年36卷第7期页码：709-712
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.07.012

扫描看全文

[1]郭光胜,张建良,焦克新,沈猛,铁金艳.椭圆管型铸铁冷却壁热态试验分析[J].特种铸造及有色合金,2016,36(07):709-712.

Guo Guangsheng, Zhang Jianliang, Jiao Kexin, et al. Analysis of Thermal Test of Elliptic Water Pipes Cast Iron Cooling Stave[J]. Special Casting & Nonferrous Alloys, 2016,36(7):709-712.
[1]郭光胜,张建良,焦克新,沈猛,铁金艳.椭圆管型铸铁冷却壁热态试验分析[J].特种铸造及有色合金,2016,36(07):709-712. DOI： 10.15980/j.tzzz.2016.07.012.

Guo Guangsheng, Zhang Jianliang, Jiao Kexin, et al. Analysis of Thermal Test of Elliptic Water Pipes Cast Iron Cooling Stave[J]. Special Casting & Nonferrous Alloys, 2016,36(7):709-712. DOI： 10.15980/j.tzzz.2016.07.012.

摘要

对消失模铸造椭圆管铸铁冷却壁进行了热态试验

发现影响热效性的主要因素为炉气温度和冷却水速度。对比分析了圆管型和椭圆管型铸铁冷却壁的传热性能。利用传热学理论计算了铸铁冷却壁热面与炉气之间的传热系数

最后验证了数值模拟方法的准确性。结果表明

炉气温度对壁体温度的影响较大;在相同炉气温度和相同供水条件下

椭圆管型冷却壁比圆管型冷却壁传热性能更好;数值模拟计算与热态试验结果偏差较小。

Abstract

The cooling stave with elliptic water pipes was produced by lost foam casting（LFC）and experimented by thermal test

and influence of furnace gas temperature and water velocity were analyzed.The thermal properties of the round water pipes and elliptic water pipes of cast iron cooling stave were analyzed comparatively

and based on the heat transferring theory

the coefficient of heat transfer between cast iron cooling stave and furnace gas was calculated.Finally

the numerical simulation was verified by experimental results.The results show that the gas temperature has great influence on temperature of stave body

and at the same furnace gas temperature and water condition

the heat transfer performance of cooling stave with elliptic water pipes is superior to that of the round water pipes ones.In addition

numerical simulation calculation is well agreement with thermal test ones.