凝固模拟在铝合金导电杆结构优化中的应用

胡郑重; 姚三九; 郭玉峰

doi:10.15980/j.tzzz.2016.06.026

轻有色合金 | 浏览量 : 0 下载量: 50 CSCD: 2

导出
分享
收藏
专辑

凝固模拟在铝合金导电杆结构优化中的应用
Application of Solidification Simulation in Structure Optimization of Aluminum Alloy Conductive Rod
2016年36卷第6期页码：646-648
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.06.026

扫描看全文

[1]胡郑重,姚三九,郭玉峰.凝固模拟在铝合金导电杆结构优化中的应用[J].特种铸造及有色合金,2016,36(06):646-648.

Hu Zhengchong, Yao Sanjiu, Guo Yufeng. Application of Solidification Simulation in Structure Optimization of Aluminum Alloy Conductive Rod[J]. Special Casting & Nonferrous Alloys, 2016,36(6):646-648.
[1]胡郑重,姚三九,郭玉峰.凝固模拟在铝合金导电杆结构优化中的应用[J].特种铸造及有色合金,2016,36(06):646-648. DOI： 10.15980/j.tzzz.2016.06.026.

Hu Zhengchong, Yao Sanjiu, Guo Yufeng. Application of Solidification Simulation in Structure Optimization of Aluminum Alloy Conductive Rod[J]. Special Casting & Nonferrous Alloys, 2016,36(6):646-648. DOI： 10.15980/j.tzzz.2016.06.026.

摘要

以金属型铸造铝合金导电杆为例

对铸件的凝固过程进行数值模拟

可以直观地发现因结构不合理导致的铸造缺陷以及定量化分析铸造缺陷

为优化铸件结构提供参考。采用优化的金属型铸造工艺

可生产出合格的铝合金导电杆。

Abstract

Casting solidification process of metal mold casting aluminum alloy conductive rod was simulated to understand the casting defects resulted from unrational structure design and to analyze quantitatively the defect distribution.Through optimizing processing parameters

the qualified aluminum alloy conductive rod was produced by permanent mold casting.