V法铸造真空系统管道设计及优化

涂益明; 叶升平; 梁庆民

doi:10.15980/j.tzzz.2016.06.020

消失模与V法铸造 | 浏览量 : 0 下载量: 67 CSCD: 2

导出
分享
收藏
专辑

V法铸造真空系统管道设计及优化
Design and Optimization of Vacuum System Pipes in V-Process Casting
2016年36卷第6期页码：628-630
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.06.020

扫描看全文

[1]涂益明,叶升平,梁庆民.V法铸造真空系统管道设计及优化[J].特种铸造及有色合金,2016,36(06):628-630.

Tu Yiming, Ye Shengping, Liang Qingmin. Design and Optimization of Vacuum System Pipes in V-Process Casting[J]. Special Casting & Nonferrous Alloys, 2016,36(6):628-630.
[1]涂益明,叶升平,梁庆民.V法铸造真空系统管道设计及优化[J].特种铸造及有色合金,2016,36(06):628-630. DOI： 10.15980/j.tzzz.2016.06.020.

Tu Yiming, Ye Shengping, Liang Qingmin. Design and Optimization of Vacuum System Pipes in V-Process Casting[J]. Special Casting & Nonferrous Alloys, 2016,36(6):628-630. DOI： 10.15980/j.tzzz.2016.06.020.

摘要

根据雷诺判别式和试验测得的抽气量数据

判定V法铸造真空管道中气体流动均为湍流

并推导出主管道和分管道面积公式。进行了管道数值模拟

发现真空泵接入处主管道直径能改变真空泵间相互影响

弯曲接头能有效消除接头处气体涡流。

Abstract

According to the Reynolds discrimination and experimental data

the gas flow in vacuum pipes of V-Process casting is judged to be turbulent

and formula of the main pipe area was derived.The gas flow in vacuum pipes was simulated by the software.The results reveal that the diameter of main pipe in the pumps can change the co-action among pumps

and the bending joint can eliminate effectively the gas vortex at the joint.