湿式弱碱性介质下的半自磨机衬板腐蚀磨损分析

陈胜迁; 郑开宏; 王海艳

doi:10.15980/j.tzzz.2016.06.005

实用研究 | 浏览量 : 0 下载量: 164 CSCD: 2

导出
分享
收藏
专辑

湿式弱碱性介质下的半自磨机衬板腐蚀磨损分析
Corrosion and Wear Failure Analysis of Semi-autogenous Mill Liner under Wet Weak Alkaline Medium
2016年36卷第6期页码：577-579
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.06.005

扫描看全文

[1]陈胜迁,郑开宏,王海艳.湿式弱碱性介质下的半自磨机衬板腐蚀磨损分析[J].特种铸造及有色合金,2016,36(06):577-579.

Chen Shengqian, Zheng Kaihong, Wang Haiyan. Corrosion and Wear Failure Analysis of Semi-autogenous Mill Liner under Wet Weak Alkaline Medium[J]. Special Casting & Nonferrous Alloys, 2016,36(6):577-579.
[1]陈胜迁,郑开宏,王海艳.湿式弱碱性介质下的半自磨机衬板腐蚀磨损分析[J].特种铸造及有色合金,2016,36(06):577-579. DOI： 10.15980/j.tzzz.2016.06.005.

Chen Shengqian, Zheng Kaihong, Wang Haiyan. Corrosion and Wear Failure Analysis of Semi-autogenous Mill Liner under Wet Weak Alkaline Medium[J]. Special Casting & Nonferrous Alloys, 2016,36(6):577-579. DOI： 10.15980/j.tzzz.2016.06.005.

摘要

针对钒钛磁铁矿湿磨工况下

半自磨机衬板的失效行为进行了研究。采用OM、SEM、EDS、硬度仪等分析手段分析了失效衬板组织的形貌特征

讨论了衬板材料在弱碱性工况下的腐蚀磨损机理。结果表明

失效衬板表面主要以切削犁沟、腐蚀坑和裂纹为主

材料表面硬度低、加工硬化效果不明显以及腐蚀磨损的交互作用是导致衬板失效的主要原因。

Abstract

Failure behavior of semi-autogenous mill liner was analyzed under V-Ti-magnetite wet grinding conditions.Through the optical microscope（OM）

scanning electron microscope（SEM）

energy dispersive spectroscopy（EDS）

hardness tester and other materials testing instruments

the microstructures of failure liner were investigated

and the corrosive wear mechanism of liner material under weak alkaline conditions was expounded.The results show that the surface of liner is mainly characterized by cutting furrow

corrosion pits and cracks.The interaction of low surface hardness

weak hardening effect and corrosion-wear of liner material are responsible for failure of liner.

关键词

衬板弱碱性腐蚀磨损

Keywords

LinerWeak AlkalineCorrosive-wear

references

文章被引用时，请邮件提醒。

提交

铜矿湿磨用球磨机合金钢衬板的腐蚀磨损失效分析