离合器壳体低压铸造工艺优化

何元元; 白智渊

doi:10.15980/j.tzzz.2016.05.012

压力铸造 | 浏览量 : 0 下载量: 103 CSCD: 0

导出
分享
收藏
专辑

离合器壳体低压铸造工艺优化
Optimization of Clutch Housing by Low Pressure Die Casting
2016年36卷第5期页码：487-488
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.05.012

扫描看全文

[1]何元元,白智渊.离合器壳体低压铸造工艺优化[J].特种铸造及有色合金,2016,36(05):487-488.

He Yuanyuan, Bai Zhiyuan. Optimization of Clutch Housing by Low Pressure Die Casting[J]. Special Casting & Nonferrous Alloys, 2016,36(5):487-488.
[1]何元元,白智渊.离合器壳体低压铸造工艺优化[J].特种铸造及有色合金,2016,36(05):487-488. DOI： 10.15980/j.tzzz.2016.05.012.

He Yuanyuan, Bai Zhiyuan. Optimization of Clutch Housing by Low Pressure Die Casting[J]. Special Casting & Nonferrous Alloys, 2016,36(5):487-488. DOI： 10.15980/j.tzzz.2016.05.012.

摘要

分析了离合器壳体铸件的结构

研究了低压铸造离合器壳体铸件工艺的难点。通过增加保温冒口、调整涂层厚度、设置预铸孔、优化浇注系统、调整浇注参数等多种手段

解决了离合器壳体铸件厚大部位的铸造缺陷问题

生产出满足使用要求的合格铸件。

Abstract

Based on analysis of features of clutch housing

key problems in low pressure casting clutch housing were described.The defects in thick-position of housing were eliminated by some countermeasures

such as setting holding riser

adjusting couting thickness

setting pre-casting hole and optimizing gating system as well as adjusting pouring parameters.The clutch housing could meet the practical requirement.