高锰钢冲击硬化层深度的数值模拟

计算机应用技术 | 浏览量 : 0 下载量: 123 CSCD: 1

扫描看全文

[1]时晓向,付建华,曹建新,郭肖肖,赵文华.高锰钢冲击硬化层深度的数值模拟[J].特种铸造及有色合金,2016,36(02):141-143.

Shi Xiaoxiang, Fu Jianhua, Cao Jianxin, et al. Numerical Simulation of Impact Hardened Layer Depth of High-Manganese Steel[J]. Special Casting & Nonferrous Alloys, 2016,36(2):141-143.
[1]时晓向,付建华,曹建新,郭肖肖,赵文华.高锰钢冲击硬化层深度的数值模拟[J].特种铸造及有色合金,2016,36(02):141-143. DOI： 10.15980/j.tzzz.2016.02.008.

Shi Xiaoxiang, Fu Jianhua, Cao Jianxin, et al. Numerical Simulation of Impact Hardened Layer Depth of High-Manganese Steel[J]. Special Casting & Nonferrous Alloys, 2016,36(2):141-143. DOI： 10.15980/j.tzzz.2016.02.008.

利用有限元软件Abaqus模拟了高锰钢冲击过程

研究高锰钢冲击过程中时效温度、载荷、频率对硬化层深度的影响。研究表明

时效温度越高

等效应变值越小

则硬化层深度越小;冲击频率和载荷越大

则等效应变值越大

则硬化层深度越大。

In order to understand effects of aging temperature

load

frequency on the hardened layer depth of high manganese steel during impact process

Abaqus software was employed to simulate highmanganese steel impact process.The results reveal that with the aging temperature increase

the equivalent plastic strain and the depth of hardened layer are decreased

while with the increase of impact frequency and load

the equivalent plastic strain and the depth of hardened layer are increased.

高锰钢时效温度载荷冲击频率硬化层深度

High-Manganese SteelAging TemperatureLoadFrequencyHardened Layer Depth

文章被引用时，请邮件提醒。

提交