低压铸造铝合金气缸盖试制技术要求

压力铸造 | 浏览量 : 0 下载量: 169 CSCD: 1

低压铸造铝合金气缸盖试制技术要求
Technical Requirements of Trial-production of Aluminum Alloy Cylinder Head in Low Pressure Die Casting
2016年36卷第1期页码：48-52
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.01.013

扫描看全文

[1]杨仁康,高方勇,王泽忠,戴维.低压铸造铝合金气缸盖试制技术要求[J].特种铸造及有色合金,2016,36(01):48-52.

Yang Renkang, Gao Fangyong, Wang Zezhong, et al. Technical Requirements of Trial-production of Aluminum Alloy Cylinder Head in Low Pressure Die Casting[J]. Special Casting & Nonferrous Alloys, 2016,36(1):48-52.
[1]杨仁康,高方勇,王泽忠,戴维.低压铸造铝合金气缸盖试制技术要求[J].特种铸造及有色合金,2016,36(01):48-52. DOI： 10.15980/j.tzzz.2016.01.013.

Yang Renkang, Gao Fangyong, Wang Zezhong, et al. Technical Requirements of Trial-production of Aluminum Alloy Cylinder Head in Low Pressure Die Casting[J]. Special Casting & Nonferrous Alloys, 2016,36(1):48-52. DOI： 10.15980/j.tzzz.2016.01.013.

试制低压铸造铝合金气缸盖时

重点是对产品结构进行分析

优化金属型设计

保证铝合金液的综合质量

确定最佳浇注工艺参数。针对缸盖结构

除脱型斜度、壁厚、铸造圆角、加强筋等需满足技术要求外

还需消除铸件热节

方便金属型拆卸

提高其精度

保持其排气系统通畅

实现缸盖的顺序凝固。

Through analyzing cylinder head cover structure

optimizing metallic mould design and ensuring the comprehensive quality of liquid aluminum alloy

the optimized pouring parameters were presented to produce low pressure casting cylinder head cover.Aiming at cylinder head cover structure

it is necessary to eliminate hot spot and convenient metallic mould as well as improving accuracy of metallic mould

keeping smoothly exhausting system to realize sequential solidification

besides of technical requirement such as drawing angle

wall thickness

round angle and enhancement rib.

气缸盖低压铸造产品结构金属型

Cylinder HeadLow Pressure Die CastingProduct StructureMould

文章被引用时，请邮件提醒。

提交