气缸盖罩压铸过程数值模拟及工艺参数优化

孙倩楠; 何林

doi:10.15980/j.tzzz.2016.01.006

计算机应用技术 | 浏览量 : 0 下载量: 111 CSCD: 4

导出
分享
收藏
专辑

气缸盖罩压铸过程数值模拟及工艺参数优化
Numerical Simulation and Processing Optimization of Die Casting Cylinder Head Cover
2016年36卷第1期页码：20-22
纸质出版日期： 2016 ，
DOI： 10.15980/j.tzzz.2016.01.006

扫描看全文

[1]孙倩楠,何林.气缸盖罩压铸过程数值模拟及工艺参数优化[J].特种铸造及有色合金,2016,36(01):20-22.

Sun Qiannan, He Lin. Numerical Simulation and Processing Optimization of Die Casting Cylinder Head Cover[J]. Special Casting & Nonferrous Alloys, 2016,36(1):20-22.
[1]孙倩楠,何林.气缸盖罩压铸过程数值模拟及工艺参数优化[J].特种铸造及有色合金,2016,36(01):20-22. DOI： 10.15980/j.tzzz.2016.01.006.

Sun Qiannan, He Lin. Numerical Simulation and Processing Optimization of Die Casting Cylinder Head Cover[J]. Special Casting & Nonferrous Alloys, 2016,36(1):20-22. DOI： 10.15980/j.tzzz.2016.01.006.

摘要

运用Anycasting软件对气缸盖罩的原工艺方案进行数值模拟分析

预测验证了原工艺缺陷的种类和位置与实际应用的一致性

在此基础上采用正交试验方法优化了工艺参数

提高了气缸盖罩零件的成品率。

Abstract

Based on analyzing the defects in cylinder head cover

Anycasting software was used to simulate casting process.It is found that the type and location of predicting defects are well in agreement with those of actual defects.In order to reduce or even eliminate defects

orthogonal experimental design was adopted to optimize casting process.The parameters of optimization process were presented for actual production of cylinder head cover

improving the qualified rate of head cover.