SPS制备Cu-50Mo触头材料的研究

尚新峰

doi:10.15980/j.tzzz.2015.11.030

重有色合金 | 浏览量 : 0 下载量: 77 CSCD: 1

导出
分享
收藏
专辑

SPS制备Cu-50Mo触头材料的研究
Microstructure and Properties of Cu-50Mo Contact Materials Prepared by Spark Plasma Sintering Process
2015年35卷第11期页码：1230-1232
纸质出版日期： 2015 ，
DOI： 10.15980/j.tzzz.2015.11.030

扫描看全文

[1]尚新峰.SPS制备Cu-50Mo触头材料的研究[J].特种铸造及有色合金,2015,35(11):1230-1232.

Shang Xinfeng. Microstructure and Properties of Cu-50Mo Contact Materials Prepared by Spark Plasma Sintering Process[J]. Special Casting & Nonferrous Alloys, 2015,35(11):1230-1232.
[1]尚新峰.SPS制备Cu-50Mo触头材料的研究[J].特种铸造及有色合金,2015,35(11):1230-1232. DOI： 10.15980/j.tzzz.2015.11.030.

Shang Xinfeng. Microstructure and Properties of Cu-50Mo Contact Materials Prepared by Spark Plasma Sintering Process[J]. Special Casting & Nonferrous Alloys, 2015,35(11):1230-1232. DOI： 10.15980/j.tzzz.2015.11.030.

摘要

采用放电等离子烧结（SPS）工艺在950℃、40 MPa下烧结20min后随炉冷却

制得Cu-50Mo触头合金材料。测试结果表明

显微硬度（HV）、电导率和致密度分别达到116、21.5 MS/m和92.5%

并对其组织和性能进行了研究

同时对比了1%的WC颗粒对Cu-50Mo合金触头材料组织性能的影响。结果表明

WC颗粒的加入能使Cu-50Mo触头材料的组织明显改善

显著提高耐磨性能显著提高。

Abstract

The Cu-50 Mo contact material was prepared by spark plasma sintering（SPS）at 950 ℃ and 45 MPa for 20 min.Microstructure and properties of the material were investigated

and the hardness

conductivity and density of the alloy reach up to 110 HV

21.5MS/m

92.5%

respectively.Furthermore

effects of 1% WC addition on the structure and properties of Cu-50 Mo alloy material were analyzed.The results indicate that structure and wear resistance of the Cu-50 Mo material were improved.