中温模料的氧化变质及其影响与对策

曲险峰; 张意鹏; 聂振帅

doi:10.15980/j.tzzz.2015.10.019

精密铸造 | 浏览量 : 0 下载量: 80 CSCD: 3

导出
分享
收藏
专辑

中温模料的氧化变质及其影响与对策
Oxidation Deterioration of Medium-temperature Pattern Material and its Effect as well as Solution
2015年35卷第10期页码：1070-1072
纸质出版日期： 2015 ，
DOI： 10.15980/j.tzzz.2015.10.019

扫描看全文

[1]曲险峰,张意鹏,聂振帅.中温模料的氧化变质及其影响与对策[J].特种铸造及有色合金,2015,35(10):1070-1072.

Qu Xianfeng, Zhang Yipeng, Nie Zhenshuai. Oxidation Deterioration of Medium-temperature Pattern Material and its Effect as well as Solution[J]. Special Casting & Nonferrous Alloys, 2015,35(10):1070-1072.
[1]曲险峰,张意鹏,聂振帅.中温模料的氧化变质及其影响与对策[J].特种铸造及有色合金,2015,35(10):1070-1072. DOI： 10.15980/j.tzzz.2015.10.019.

Qu Xianfeng, Zhang Yipeng, Nie Zhenshuai. Oxidation Deterioration of Medium-temperature Pattern Material and its Effect as well as Solution[J]. Special Casting & Nonferrous Alloys, 2015,35(10):1070-1072. DOI： 10.15980/j.tzzz.2015.10.019.

摘要

分析了中温模料组分的氧化特性。在模料反复使用过程中

高温脱蜡、高温搅拌除水是模料氧化变质的主要原因。随着模料的逐渐氧化

除水变得越来越难

灰分、收缩率、粘度越来越高

严重影响铸件的质量。合理的处理工艺可以减缓模料的氧化。

Abstract

The oxidation characteristics of medium-temperature pattern material for investment casting was summarized.In the process of repeated use of pattern material

the oxidation deterioration was resulted from the high temperature in the process of dewaxing and water removal.With the gradually oxidation of the pattern material

its water removal is more and more difficult

and its ash content

shrinkage and viscosity is higher and higher

thus the cast quality is deteriorated greatly.The rational process for dewaxing and water removal can be helpful for the oxidation slowdown.

关键词

中温模料氧化模料回收

Keywords

Medium-temperature Pattern MaterialOxidizationWax Pattern Reclamation

references

文章被引用时，请邮件提醒。

提交

暂无数据