WC颗粒增强钢（铁）基表层复合材料的热疲劳特性

冯志扬; 李祖来; 山泉; 黄浩科; 蒋业华; 周荣

doi:10.15980/j.tzzz.2015.08.022

复合材料 | 浏览量 : 0 下载量: 162 CSCD: 4

导出
分享
收藏
专辑

WC颗粒增强钢（铁）基表层复合材料的热疲劳特性
Thermal Fatigue Performance of WC Particles Reinforced Fe Matrix Surface Composites
2015年35卷第8期页码：859-862
纸质出版日期： 2015 ，
DOI： 10.15980/j.tzzz.2015.08.022

扫描看全文

[1]冯志扬,李祖来,山泉,黄浩科,蒋业华,周荣.WC颗粒增强钢(铁)基表层复合材料的热疲劳特性[J].特种铸造及有色合金,2015,35(08):859-862.

Feng Zhiyang, Li Zulai, Shan Quan, et al. Thermal Fatigue Performance of WC Particles Reinforced Fe Matrix Surface Composites[J]. Special Casting & Nonferrous Alloys, 2015,35(8):859-862.
[1]冯志扬,李祖来,山泉,黄浩科,蒋业华,周荣.WC颗粒增强钢(铁)基表层复合材料的热疲劳特性[J].特种铸造及有色合金,2015,35(08):859-862. DOI： 10.15980/j.tzzz.2015.08.022.

Feng Zhiyang, Li Zulai, Shan Quan, et al. Thermal Fatigue Performance of WC Particles Reinforced Fe Matrix Surface Composites[J]. Special Casting & Nonferrous Alloys, 2015,35(8):859-862. DOI： 10.15980/j.tzzz.2015.08.022.

摘要

采用等离子快速烧结（SPS）+界面重熔法成功制备了具有不同组织的WC颗粒增强钢（铁）基表层复合材料

并对复合材料的热疲劳性能进行了测试

重点研究了基体、WC颗粒分布及界面对复合材料热疲劳特性的影响。结果表明

当基体组织为珠光体时

表层复合材料具有较好的耐热疲劳性能;WC颗粒分布会显著影响复合材料的热疲劳特性;边缘排布一排WC颗粒的复合材料具有较小的热疲劳裂纹扩展速率;材料的界面直接影响着材料的热疲劳性能。

Abstract

A series of matrix composites reinforced by tungsten carbide particles with different sizes were fabricated by spark plasma sintering（SPS）technology combined with interface remelting process in a vacuum tube furnace to investigate thermal fatigue performance of the surface composites prepared

focusing on effects of interface

particles distribution and matrix in the composite for thermal fatigue behavior.The results show that thermal fatigue performance of the composites with pearlite at surface layer is supperior to those of the composites with ferrite matrix.The distribution of particles is related with the thermal fatigue performance of composites observably.The composites with a row of particles distributed at the edge exhibit the smaller crack propagation rate.The interface is directly related with the thermal fatigue performance of the composites prepared.