覆膜砂生产五节距齿轨工艺研究

冯义宏; 云雪峰; 刘宇航; 霍志刚

doi:10.15980/j.tzzz.2015.05.030

生产技术 | 浏览量 : 0 下载量: 61 CSCD: 1

导出
分享
收藏
专辑

覆膜砂生产五节距齿轨工艺研究
Production of Five Pitch Gear Rail by Coated Resin Sand
2015年35卷第5期页码：559-560
纸质出版日期： 2015 ，
DOI： 10.15980/j.tzzz.2015.05.030

扫描看全文

[1]冯义宏,云雪峰,刘宇航,霍志刚.覆膜砂生产五节距齿轨工艺研究[J].特种铸造及有色合金,2015,35(05):559-560.

Feng Yihong, Yun Xuefeng, Liu Yuhang, et al. Production of Five Pitch Gear Rail by Coated Resin Sand[J]. Special Casting & Nonferrous Alloys, 2015,35(5):559-560.
[1]冯义宏,云雪峰,刘宇航,霍志刚.覆膜砂生产五节距齿轨工艺研究[J].特种铸造及有色合金,2015,35(05):559-560. DOI： 10.15980/j.tzzz.2015.05.030.

Feng Yihong, Yun Xuefeng, Liu Yuhang, et al. Production of Five Pitch Gear Rail by Coated Resin Sand[J]. Special Casting & Nonferrous Alloys, 2015,35(5):559-560. DOI： 10.15980/j.tzzz.2015.05.030.

摘要

分析了覆膜砂生产五节距齿轨过程中的工艺难点

铸件在造型时砂箱倾斜角度为（20±5）°

浇注时负压值为（0.04±0.01）MPa

浇注温度为（1 540±10）℃

点注2

次

撒保温剂。保压时间为（300±5）s

泄压后冷却5h后打箱

铸件的外观及内部品质可以达到最优。

Abstract

The technological probelems in production of five picth gear rail by coated resin sand were described.Sand box is tilted to（20±5）°during moulding

and pouring was conducted at（1 540±10）℃with pressure of（0.04±0.01）MPa and 2

pit pouring as well as heat preservation agent treatment.Through holding pressure for（300±5）s and cooling for 5hours after pressure-exhausting and then shaking out

the appearance and inner quality of the gear rail parts exhibit satisfactory.

关键词

覆膜砂五节距齿轨负压浇注

Keywords

Coated Resin SandFive Pitch Gear RailNegative Pressure Pouring

references

文章被引用时，请邮件提醒。

提交

暂无数据