大宽厚比连续挤压Cu带坯板型的控制

徐高磊; 姚幼甫; 骆越峰

doi:10.15980/j.tzzz.2015.02.023

连续铸造 | 浏览量 : 0 下载量: 85 CSCD: 1

导出
分享
收藏
专辑

大宽厚比连续挤压Cu带坯板型的控制
Size Control of Copper Strip Flatness with High Width-thickness Ratio in Continuous Extrusion
2015年35卷第2期页码：181-183
纸质出版日期： 2015 ，
DOI： 10.15980/j.tzzz.2015.02.023

扫描看全文

[1]徐高磊,姚幼甫,骆越峰.大宽厚比连续挤压Cu带坯板型的控制[J].特种铸造及有色合金,2015,35(02):181-183.

Xu Gaolei, Yao Youfu, Luo Yuefeng. Size Control of Copper Strip Flatness with High Width-thickness Ratio in Continuous Extrusion[J]. Special Casting & Nonferrous Alloys, 2015,35(2):181-183.
[1]徐高磊,姚幼甫,骆越峰.大宽厚比连续挤压Cu带坯板型的控制[J].特种铸造及有色合金,2015,35(02):181-183. DOI： 10.15980/j.tzzz.2015.02.023.

Xu Gaolei, Yao Youfu, Luo Yuefeng. Size Control of Copper Strip Flatness with High Width-thickness Ratio in Continuous Extrusion[J]. Special Casting & Nonferrous Alloys, 2015,35(2):181-183. DOI： 10.15980/j.tzzz.2015.02.023.

摘要

研究了大宽厚比连续挤压Cu带坯板型的控制。通过对工装模具、挤压通道等设计和优化

使得大宽厚比Cu带坯连续挤压板型得到了有效控制

满足了连续挤压Cu带坯不铣面直接冷轧的要求。

Abstract

Flatness control of copper strip with high width-thickness ratio during continuous extrusion was analyzed.Through design and optimization of mould and the extrusion channel

copper continuous extrusion strip is control effectively

which can realize directly cold rolling without scalping.