承力机匣气腔精密铸造技术研究

郝新; 周坚; 胡兵; 贺峥嵘; 蔡瑜; 胡啸

doi:10.15980/j.tzzz.2015.01.019

精密铸造 | 浏览量 : 0 下载量: 170 CSCD: 1

导出
分享
收藏
专辑

承力机匣气腔精密铸造技术研究
Production of the Cartridge Receiver Gas Chamber by Investment Casting
2015年35卷第1期页码：66-67
纸质出版日期： 2015 ，
DOI： 10.15980/j.tzzz.2015.01.019

扫描看全文

[1]郝新,周坚,胡兵,贺峥嵘,蔡瑜,胡啸.承力机匣气腔精密铸造技术研究[J].特种铸造及有色合金,2015,35(01):66-67.

Hao Xin, Zhou Jian, Hu Bing, et al. Production of the Cartridge Receiver Gas Chamber by Investment Casting[J]. Special Casting & Nonferrous Alloys, 2015,35(1):66-67.
[1]郝新,周坚,胡兵,贺峥嵘,蔡瑜,胡啸.承力机匣气腔精密铸造技术研究[J].特种铸造及有色合金,2015,35(01):66-67. DOI： 10.15980/j.tzzz.2015.01.019.

Hao Xin, Zhou Jian, Hu Bing, et al. Production of the Cartridge Receiver Gas Chamber by Investment Casting[J]. Special Casting & Nonferrous Alloys, 2015,35(1):66-67. DOI： 10.15980/j.tzzz.2015.01.019.

摘要

对某型承力机匣气腔成型技术进行研究

确定了借助陶瓷型芯形成承力机匣气腔。针对陶瓷型芯成型和使用技术进行了一系列工艺的研究和探索

合理设计了所用陶瓷型芯的结构

确定了生产用陶瓷型芯、可行的工艺方法和工艺参数

成功铸造出了气腔尺寸和表面质量满足使用要求的承力机匣整体精铸件。

Abstract

The forming technology of cartridge receiver gas chamber was explored.The cartridge receiver gas chamber was formed with the help of ceramic core.A series of new process of ceramic core moulding and using were investigatewd.The structure of ceramic core was designed reasonably

and the feasible process and parameters were determined.The cartridge receiver was produced sucessfully with meeting requirement of gas chamber size and surface quality.