电渣冶金过程中结晶器旋转对铸锭致密度的影响

常立忠; 施晓芳; 从俊强; 汪润西; 李涛

doi:10.15980/j.tzzz.2014.12.004

实用研究 | 浏览量 : 0 下载量: 111 CSCD: 3

导出
分享
收藏
专辑

电渣冶金过程中结晶器旋转对铸锭致密度的影响
Effects of Mould Motion on Compact Density of Electroslag Ingots during Electroslag Remelting Process
2014年34卷第12期页码：1247-1249
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.12.004

扫描看全文

[1]常立忠,施晓芳,从俊强,汪润西,李涛.电渣冶金过程中结晶器旋转对铸锭致密度的影响[J].特种铸造及有色合金,2014,34(12):1247-1249.

Chang Lizhong, Shi Xiaofang, Cong Junqiang, et al. Effects of Mould Motion on Compact Density of Electroslag Ingots during Electroslag Remelting Process[J]. Special Casting & Nonferrous Alloys, 2014,34(12):1247-1249.
[1]常立忠,施晓芳,从俊强,汪润西,李涛.电渣冶金过程中结晶器旋转对铸锭致密度的影响[J].特种铸造及有色合金,2014,34(12):1247-1249. DOI： 10.15980/j.tzzz.2014.12.004.

Chang Lizhong, Shi Xiaofang, Cong Junqiang, et al. Effects of Mould Motion on Compact Density of Electroslag Ingots during Electroslag Remelting Process[J]. Special Casting & Nonferrous Alloys, 2014,34(12):1247-1249. DOI： 10.15980/j.tzzz.2014.12.004.

摘要

设计了结晶器可旋转的电渣炉

研究了旋转速率对电渣锭致密度的影响。结果表明

当结晶器的旋转速率从0增加到28r/min时

电渣锭的致密度显著提高

从77%提高到94%

且组织分布更加均匀;而当旋转速率达到35r/min时

致密度反而降至91%

这说明结晶器适当的运动可以改善钢锭的凝固组织。

Abstract

A new electroslag furnace with mould rotation was designed

and effects of mould rotation velocity on the compact density of electroslag ingot were analyzed.Experiment results show that ESR ingot can become more compact from 77%to 94% and more uniform distribution with the mould of rotation velocity from 0to 28r/min.However

with rotation velocity to 35r/min

the compact density is deteriorated to 91%

which reveals that the solidification structure can be improved through appropriate mould motion.