铝合金连杆浮动凹模挤压铸造模具结构设计

唐全波; 杜力

doi:10.15980/j.tzzz.2014.11.016

压力铸造 | 浏览量 : 0 下载量: 137 CSCD: 5

导出
分享
收藏
专辑

铝合金连杆浮动凹模挤压铸造模具结构设计
Structure Design of the Mould with Floating-Concave Die for Squeeing-Casting Aluminum Alloy Connecting Rod
2014年34卷第11期页码：1173-1175
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.11.016

扫描看全文

[1]唐全波,杜力.铝合金连杆浮动凹模挤压铸造模具结构设计[J].特种铸造及有色合金,2014,34(11):1173-1175.

Tang Quanbo, Du Li. Structure Design of the Mould with Floating-Concave Die for Squeeing-Casting Aluminum Alloy Connecting Rod[J]. Special Casting & Nonferrous Alloys, 2014,34(11):1173-1175.
[1]唐全波,杜力.铝合金连杆浮动凹模挤压铸造模具结构设计[J].特种铸造及有色合金,2014,34(11):1173-1175. DOI： 10.15980/j.tzzz.2014.11.016.

Tang Quanbo, Du Li. Structure Design of the Mould with Floating-Concave Die for Squeeing-Casting Aluminum Alloy Connecting Rod[J]. Special Casting & Nonferrous Alloys, 2014,34(11):1173-1175. DOI： 10.15980/j.tzzz.2014.11.016.

摘要

采用一种具有浮动功能的凹模

设计了在通用压力机上即可实现铝合金连杆挤压铸造成形的模具结构。由于凹模的浮动作用

在连杆毛坯的挤压铸造成形过程中

模具可同时实现连杆毛坯的液态压力充型、压力下结晶凝固、压力补缩和固态的塑性变形等主要功能。通过工艺试验

获得的连杆毛坯的力学性能得到大幅提高

并具有优良的表面质量。

Abstract

A mould structure with a floating-concave die for squeeing-casting aluminum alloy connecting rod was designed.The mould can be used on conventional press.By the floating motion of the floatingconcave die during the whole squeeing-casting process

the mould has the functions of filling

crystallization

solidification feeding under pressure and plastic deformation.The mechanical properties of aluminum alloy connecting rods manufactured by the mould can be improved greatly with desirable surface quality.