穿孔顶头的制管试验及改进措施

裘俊彦; 潘安霞

doi:10.15980/j.tzzz.2014.11.006

实用研究 | 浏览量 : 0 下载量: 113 CSCD: 0

导出
分享
收藏
专辑

穿孔顶头的制管试验及改进措施
Piercing Plug Pipe Test and Improvement Measures
2014年34卷第11期页码：1140-1142
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.11.006

扫描看全文

[1]裘俊彦,潘安霞.穿孔顶头的制管试验及改进措施[J].特种铸造及有色合金,2014,34(11):1140-1142.

Qiu Junyan, Pan Anxia. Piercing Plug Pipe Test and Improvement Measures[J]. Special Casting & Nonferrous Alloys, 2014,34(11):1140-1142.
[1]裘俊彦,潘安霞.穿孔顶头的制管试验及改进措施[J].特种铸造及有色合金,2014,34(11):1140-1142. DOI： 10.15980/j.tzzz.2014.11.006.

Qiu Junyan, Pan Anxia. Piercing Plug Pipe Test and Improvement Measures[J]. Special Casting & Nonferrous Alloys, 2014,34(11):1140-1142. DOI： 10.15980/j.tzzz.2014.11.006.

摘要

针对无缝管三辊穿孔顶头使用寿命低、"掉肉"、粘钢等失效问题

选用3种不同材质的顶头进行了试验。通过制定合理的加热参数、氧化工艺方案等措施

找到了适合工况的顶头新材质

提高了顶头的使用寿命

保证了钢管的品质

提高了生产效率。

Abstract

For the low service life

"flesh out"

sticky steel failure in seamless three-roll piercing plug in the early stages

three plug trials with different materials were conducted.By determining rational heating parameters and taking reasonable oxidation programs as well as other measures

the new plug material suitable for the working conditions was presented

and the service life of plug was improved to ensure the quality of the steel and increase production efficiency.