DZ4、DZ22定向合金叶片的再结晶分析

张玉忱; 李光泽; 郭伟杰

doi:10.15980/j.tzzz.2014.10.028

特种合金 | 浏览量 : 0 下载量: 97 CSCD: 0

导出
分享
收藏
专辑

DZ4、DZ22定向合金叶片的再结晶分析
Effect of Recrystallization on the DZ4、DZ22Directional Alloy Blade
2014年34卷第10期页码：1103-1106
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.10.028

扫描看全文

[1]张玉忱,李光泽,郭伟杰.DZ4、DZ22定向合金叶片的再结晶分析[J].特种铸造及有色合金,2014,34(10):1103-1106.

Zhang Yuchen, Li Guangze, Guo Weijie. Effect of Recrystallization on the DZ4、DZ22Directional Alloy Blade[J]. Special Casting & Nonferrous Alloys, 2014,34(10):1103-1106.
[1]张玉忱,李光泽,郭伟杰.DZ4、DZ22定向合金叶片的再结晶分析[J].特种铸造及有色合金,2014,34(10):1103-1106. DOI： 10.15980/j.tzzz.2014.10.028.

Zhang Yuchen, Li Guangze, Guo Weijie. Effect of Recrystallization on the DZ4、DZ22Directional Alloy Blade[J]. Special Casting & Nonferrous Alloys, 2014,34(10):1103-1106. DOI： 10.15980/j.tzzz.2014.10.028.

摘要

对不同寿命的DZ4、DZ22合金叶片进行了解剖分析。结果表明

由于加工工艺的不同

叶片的不同部位再结晶厚度不同

再结晶晶粒沿枝晶轴的生长速率大于沿枝晶间的生长速率。枝晶间的再结晶组织为胞状结构

再结晶组织在叶片的使用过程中没有进一步长大

但存在晶界宽化现象

并有颗粒状碳化物析出。

Abstract

The DZ4

DZ22 directional alloy blades with different service life were analyzed.The results show that different location of the blade has different recrystallization thickness due to the processing technology difference

and the growth rate of recrystallization grain size along the dendric axis is faster than along the interdendritic.Interdendritic recrystallization structure exhibits the cellular structure

which isn’t further grown in the process of the use of the blade.However

grain boundary is wided with granular carbide precipitation.