复杂壳体类镁合金压铸件凝固过程工艺优化

陈磊; 游国强; 李阳; 明玥; 杨明华; 李扬德; 李卫荣

doi:10.15980/j.tzzz.2014.10.019

压力铸造 | 浏览量 : 0 下载量: 101 CSCD: 3

导出
分享
收藏
专辑

复杂壳体类镁合金压铸件凝固过程工艺优化
Design and Optimization of Process Structure and Parameters for Solidification Process of Complicated Die Casting Magnesium Housings
2014年34卷第10期页码：1073-1076
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.10.019

扫描看全文

[1]陈磊,游国强,李阳,明玥,杨明华,李扬德,李卫荣.复杂壳体类镁合金压铸件凝固过程工艺优化[J].特种铸造及有色合金,2014,34(10):1073-1076.

Chen Lei, You Guoqiang, Li Yang, et al. Design and Optimization of Process Structure and Parameters for Solidification Process of Complicated Die Casting Magnesium Housings[J]. Special Casting & Nonferrous Alloys, 2014,34(10):1073-1076.
[1]陈磊,游国强,李阳,明玥,杨明华,李扬德,李卫荣.复杂壳体类镁合金压铸件凝固过程工艺优化[J].特种铸造及有色合金,2014,34(10):1073-1076. DOI： 10.15980/j.tzzz.2014.10.019.

Chen Lei, You Guoqiang, Li Yang, et al. Design and Optimization of Process Structure and Parameters for Solidification Process of Complicated Die Casting Magnesium Housings[J]. Special Casting & Nonferrous Alloys, 2014,34(10):1073-1076. DOI： 10.15980/j.tzzz.2014.10.019.

摘要

针对复杂壳体类镁合金压铸件

进行了浇注系统和工艺参数设计

运用AnyCasting软件对其凝固过程进行了数值模拟

预测了压铸件中可能出现缩孔、缩松的部位。在厚大部位增加溢流槽的数量和体积、降低浇注温度和模具温度

由于其补缩能力有限

以致缩孔、缩松等缺陷降低不明显;而在厚大部位设置内浇道

改变厚大部位的凝固顺序和增加对厚大部位的补缩

缩孔、缩松明等缺陷明显减少。

Abstract

Pouring system and processing parameters were designed for die casting complicated magnesium alloy housings.The solidification process of die casting magnesium alloy was simulated with the help of AnyCasting software to forecast macro porosity probability in the die casting.Through adding numbers and size of overflow at thick location

decreasing pouring temperature and mould temperature

effects of eliminating shrinkage porosity（holes）exhibit weak as a result of low feeding ability.However

through setting ingate at the thick location to modify solidification sequence and increase feeding ability of thick location

defects such as shrinkage porosities（holes）can be eliminated effectively.