基于ProCAST的高炉铸铜冷却壁铸造工艺优化

卢献忠; 万旭伟; 谢建萍; 钟毅; 王志; 范晓明

doi:10.15980/j.tzzz.2014.09.047

计算机应用技术 | 浏览量 : 0 下载量: 196 CSCD: 3

导出
分享
收藏
专辑

基于ProCAST的高炉铸铜冷却壁铸造工艺优化
Processing Optimization of Cast Copper Stave Based on ProCAST Software
2014年34卷第9期页码：913-916
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.09.047

扫描看全文

[1]卢献忠,万旭伟,谢建萍,钟毅,王志,范晓明.基于ProCAST的高炉铸铜冷却壁铸造工艺优化[J].特种铸造及有色合金,2014,34(09):913-916.

Lu Xianzhong, Wan Xuwei, Xie Jianping, et al. Processing Optimization of Cast Copper Stave Based on ProCAST Software[J]. Special Casting & Nonferrous Alloys, 2014,34(9):913-916.
[1]卢献忠,万旭伟,谢建萍,钟毅,王志,范晓明.基于ProCAST的高炉铸铜冷却壁铸造工艺优化[J].特种铸造及有色合金,2014,34(09):913-916. DOI： 10.15980/j.tzzz.2014.09.047.

Lu Xianzhong, Wan Xuwei, Xie Jianping, et al. Processing Optimization of Cast Copper Stave Based on ProCAST Software[J]. Special Casting & Nonferrous Alloys, 2014,34(9):913-916. DOI： 10.15980/j.tzzz.2014.09.047.

摘要

根据铸铜冷却壁的结构

设计了两种不同的浇注系统

并利用ProCAST对其进行数值模拟

预测了铸造缺陷可能存在的部位。针对模拟结果

对优选工艺进行工艺优化

确定了铸铜冷却壁的铸造工艺。试生产结果表明

所生产的铜冷却壁铸件基本满足技术要求。

Abstract

Based on the structure of cast copper cooling stave

two kinds of gating systems were designed

and the casting process was simulated by the ProCAST software in order to visualize the casting defects.And then

the process was optimized based on the simulated results

and the final casting process of cast copper cooling stave was determined.The trial production shows that the cast copper cooling stave can meet the requirement.