6061合金轮毂锻造过程中的力学性能变化

刘宏磊; 刘宏峰; 苏兴振; 张宝

doi:10.15980/j.tzzz.2014.08.013

轻有色合金 | 浏览量 : 0 下载量: 238 CSCD: 0

导出
分享
收藏
专辑

6061合金轮毂锻造过程中的力学性能变化
Change of Mechanical Properties of 6061 Aluminum Alloy Wheel during Forging Process
2014年34卷第8期页码：889-892
纸质出版日期： 2014 ，
DOI： 10.15980/j.tzzz.2014.08.013

扫描看全文

[1]刘宏磊,刘宏峰,苏兴振,张宝.6061合金轮毂锻造过程中的力学性能变化[J].特种铸造及有色合金,2014,34(08):889-892.

Liu Honglei, Liu Hongfei, Su Xingzhen, et al. Change of Mechanical Properties of 6061 Aluminum Alloy Wheel during Forging Process[J]. Special Casting & Nonferrous Alloys, 2014,34(8):889-892.
[1]刘宏磊,刘宏峰,苏兴振,张宝.6061合金轮毂锻造过程中的力学性能变化[J].特种铸造及有色合金,2014,34(08):889-892. DOI： 10.15980/j.tzzz.2014.08.013.

Liu Honglei, Liu Hongfei, Su Xingzhen, et al. Change of Mechanical Properties of 6061 Aluminum Alloy Wheel during Forging Process[J]. Special Casting & Nonferrous Alloys, 2014,34(8):889-892. DOI： 10.15980/j.tzzz.2014.08.013.

摘要

针对6061变形铝合金锻造轮毂T6热处理后出现力学性能异常

研究了加工过程中不同阶段及不同T6热处理工艺对6061变形铝合金轮毂力学性能的影响

并对产生力学性能异常的原因进行了分析

通过调整热处理工艺找到了解决力学性能异常的途径。

Abstract

Abnormal mechanical properties of forged 6061 wrought aluminum alloy wheel could be analyzed after T6 heat treatment.Effects of different working stages and T6 treatment on mechanical properties of the wheel were analyzed.In addition

the origination of abnormal mechanical properties was described.The countermeasures of eliminating abnormal mechanical property data were presented through adjusting heat treatment processes.