稳定化退火对5B01合金性能和织构转变的影响

轻有色合金 | 浏览量 : 0 下载量: 90 CSCD: 0

稳定化退火对5B01合金性能和织构转变的影响
Influence of Stabilizing Annealing on Properties and Texture Evolution of 5B01 Alloy
2012年32卷第10期页码：945-948
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.10.023

扫描看全文

[1]赵毅,黄继武,胡健,傅乐,蹇海根.稳定化退火对5B01合金性能和织构转变的影响[J].特种铸造及有色合金,2012,32(10):945-948.

Zhao Yi1, Huang Jiwu1, Hu Jian1, et al. Influence of Stabilizing Annealing on Properties and Texture Evolution of 5B01 Alloy[J]. Special Casting & Nonferrous Alloys, 2012,32(10):945-948.
[1]赵毅,黄继武,胡健,傅乐,蹇海根.稳定化退火对5B01合金性能和织构转变的影响[J].特种铸造及有色合金,2012,32(10):945-948. DOI： 10.15980/j.tzzz.2012.10.023.

Zhao Yi1, Huang Jiwu1, Hu Jian1, et al. Influence of Stabilizing Annealing on Properties and Texture Evolution of 5B01 Alloy[J]. Special Casting & Nonferrous Alloys, 2012,32(10):945-948. DOI： 10.15980/j.tzzz.2012.10.023.

采用半连续铸造-轧制技术制备了5B01合金板材。研究了稳定化退火工艺对冷轧板材力学性能、抗剥落腐蚀性能以及织构的影响。结果表明

随稳定化退火温度的升高

5B01冷轧板强度呈现下降趋势而塑性升高

抗剥落腐蚀能力则先升后降。冷轧板材中主要存在黄铜织构{011}（211）

铜织构{112}（111）和S织构{123}<634>

当退火温度升高到300℃左右时

板材的形变织构逐渐消失

分别向立方职构{001}（100）以及旋转立方织构{001}（110）转变。

5B01 alloy sheet was prepared by semi-continuous casting-rolling technology.Influences of stabilizing annealing on the mechanical properties

exfoliation corrosion resistance and texture of the cold rolling sheet were investigated.The results show that

with increasing in stabilizing annealing temperature

strength of the alloy is decreased and elongation is increased

however

exfoliation corrosion resistance of the alloy is increased firstly and then decreased.There are mainly Brass{011}(211)

Copper{112}(111) and S{123}<634> texture in cold-rolled Al-Mg alloy sheets.With the annealing temperature increasing to 300 ℃

the deformed textures disappear gradually

and the brass and copper textures are evolved into cube{001}(100) and cube-rotation{001}(110) textures.

5B01合金热处理力学性能腐蚀织构

5B01 AlloyHeat TreatmentMechanical PropertiesCorrosionTexture

文章被引用时，请邮件提醒。

提交