纳米SiC粉体对ZM-6镁合金耐盐雾腐蚀性能的影响

张颖; 陈美玲; 高宏; 杨莉

doi:10.15980/j.tzzz.2012.05.025

轻有色合金 | 浏览量 : 0 下载量: 143 CSCD: 1

导出
分享
收藏
专辑

纳米SiC粉体对ZM-6镁合金耐盐雾腐蚀性能的影响
Effects of Nano-SiC Powder on Corrosion Behavior of ZM-6 Magnesium Alloy in Salt-Fog Corrosion
2012年32卷第5期页码：479-481
纸质出版日期： 2012 ，
DOI： 10.15980/j.tzzz.2012.05.025

扫描看全文

[1]张颖,陈美玲,高宏,杨莉.纳米SiC粉体对ZM-6镁合金耐盐雾腐蚀性能的影响[J].特种铸造及有色合金,2012,32(05):479-481.

Zhang Ying1, Chen Meiling1, Gao Hong1, et al. Effects of Nano-SiC Powder on Corrosion Behavior of ZM-6 Magnesium Alloy in Salt-Fog Corrosion[J]. Special Casting & Nonferrous Alloys, 2012,32(5):479-481.
[1]张颖,陈美玲,高宏,杨莉.纳米SiC粉体对ZM-6镁合金耐盐雾腐蚀性能的影响[J].特种铸造及有色合金,2012,32(05):479-481. DOI： 10.15980/j.tzzz.2012.05.025.

Zhang Ying1, Chen Meiling1, Gao Hong1, et al. Effects of Nano-SiC Powder on Corrosion Behavior of ZM-6 Magnesium Alloy in Salt-Fog Corrosion[J]. Special Casting & Nonferrous Alloys, 2012,32(5):479-481. DOI： 10.15980/j.tzzz.2012.05.025.

摘要

采用压入法将纳米SiC粉体加入到ZM-6镁合金中

研究纳米SiC粉体对ZM-6镁合金组织及耐盐雾腐蚀性能的影响。结果表明

经过纳米SiC粉体强化处理后的ZM-6镁合金组织细化

晶粒尺寸减小;经T6热处理后

析出物分布弥散均匀。当SiC粉体加入量为0.1%时

盐雾腐蚀速率降低了42%

表现出优越的耐盐雾腐蚀性能。

Abstract

SiC nano-powders reinforced ZM-6 Mg alloy was prepared by infiltration method

and the microstructures and salt-fog corrosion behavior of the composites prepared were investigated.The results show that the microstructure in nano-SiC powders reinforced ZM-6 Mg alloys is refined with the decrease of grain size

and precipitates are uniformly distributed into the composites after T6 heat treatment.The salt-fog corrosion rate of the composites with 0.1% SiC powder content is decreased by 42%

showing the excellent corrosion resistance in salt-fog corrosion.

关键词

ZM-6镁合金纳米SiC粉体盐雾腐蚀

Keywords

ZM-6 Mg AlloyNano-SiC PowdersSalt-fog Corrosion

references

文章被引用时，请邮件提醒。

提交

暂无数据