基于浇口杯补缩的横浇道型浇注系统设计

许云祥; 王高增

doi:10.15980/j.tzzz.2000.05.015

浏览量 : 0 下载量: 336 CSCD: 9

导出
分享
收藏
专辑

基于浇口杯补缩的横浇道型浇注系统设计
Design of Runner Type Gating System Based on Basin Feeding
2000年第5期页码：35-37
纸质出版日期： 2000 ，
DOI： 10.15980/j.tzzz.2000.05.015

扫描看全文

[1]许云祥,王高增.基于浇口杯补缩的横浇道型浇注系统设计[J].特种铸造及有色合金,2000(05):35-37+1.

Xu Yunxiang. Design of Runner Type Gating System Based on Basin Feeding[J]. Special Casting & Nonferrous Alloys, 2000,(5):35-37.
[1]许云祥,王高增.基于浇口杯补缩的横浇道型浇注系统设计[J].特种铸造及有色合金,2000(05):35-37+1. DOI： 10.15980/j.tzzz.2000.05.015.

Xu Yunxiang. Design of Runner Type Gating System Based on Basin Feeding[J]. Special Casting & Nonferrous Alloys, 2000,(5):35-37. DOI： 10.15980/j.tzzz.2000.05.015.

摘要

在熔模铸造横浇道型浇注系统中

浇口杯是比横浇道更为重要的补缩源

因此在立足于浇口杯为补缩源、横浇道和内浇道为浇注补缩通道的基础上

开发了适用于熔模铸造横浇道型浇注补缩系统设计的新设计方法

在详细分析了浇口杯的实际补缩情况后

建立了相应的数学补缩模式和不同浇口杯的铸件组许用铸件总质量表

并具体介绍了设计计算过程

Abstract

The research showed that basin is the more important feeding resource than runner in runner type gating system in lost wax casting. Therefore

on the basis of the basin as feeding resource

runner and ingate as feeding channel

a new design method for runner type pouring and feeding system in investment casting was developed. The corresponding feeding mathematical pattern and allowable total weight listed for casting cluster with different basin were established after analyzing the practical feeding of basin and the calculating process for design was described in detail.