高铝锌基合金（30%～45%Al）耐磨性能的研究

张伟; 黄积荣; 王家炘

浏览量 : 0 下载量: 88 CSCD: 29

导出
分享
收藏
专辑

高铝锌基合金（30%～45%Al）耐磨性能的研究
Wear Resistanoe of High Aluminium Zinc-Based Alloys
1992年第4期页码：6-10
纸质出版日期： 1992 ，
DOI：

扫描看全文

[1]张伟,黄积荣,王家炘.高铝锌基合金(30%～45%Al)耐磨性能的研究[J].特种铸造及有色合金,1992(04):6-10.

Zhang Wei. Wear Resistanoe of High Aluminium Zinc-Based Alloys[J]. Special Casting & Nonferrous Alloys, 1992,(4):6-10.
[1]张伟,黄积荣,王家炘.高铝锌基合金(30%～45%Al)耐磨性能的研究[J].特种铸造及有色合金,1992(04):6-10. DOI：

Zhang Wei. Wear Resistanoe of High Aluminium Zinc-Based Alloys[J]. Special Casting & Nonferrous Alloys, 1992,(4):6-10. DOI：

摘要

研究了铝含量分别为30％、40％、45％的锌基合金在不同状态下的耐磨性能

试验结果表明:在保证铸件良好健全度的前提下

这些锌基合金的耐磨性能明显优于锡青铜ZCuSn6Zn6Pb3和铝青铜ZCuAl9Fe4;适当的铸态时效可以提高高铝锌基合金的耐磨性。此外

还分析了铸件健全度对耐磨性能的影响

并对高铝锌基合金的耐磨机理作了初步的探讨。

Abstract

The wear resistance of high aluminium zinc-based alloys containing 30

40 and 45% wt. Al at diffrent conditions was investigated. It was shown that the high aluminium zinc-based alloys were superior to ZCuSn6Zn6Pb3 and ZCuA19Fe4 in wear resistance providing the castings are of higher soundness

and a suitable as-cast aging could improve the wear resistance of Zinc-based alloys. In addition

the effects of soundness of castings on wear resistance was analyzed

the wear resistance mechanism of these alloys was explored.

关键词

高铝锌基合金健全度耐磨性

Keywords

高铝锌基合金健全度耐磨性

references

文章被引用时，请邮件提醒。

提交

高铝锌基合金实用研究