低压铸造流动与传热耦合计算的研究

陈立亮; 刘瑞祥; 林汉同; 潘增源; 刘金蕾; 支前明

浏览量 : 0 下载量: 78 CSCD: 12

导出
分享
收藏
专辑

低压铸造流动与传热耦合计算的研究
Study on the Numerical Simulation Coupling of Fluid Flow and Heat Transfer for Low Pressure Casting
1998年第5期
纸质出版日期： 1998 ，
DOI：

扫描看全文

[1]陈立亮,刘瑞祥,林汉同,潘增源,刘金蕾,支前明.低压铸造流动与传热耦合计算的研究[J].特种铸造及有色合金,1998(05):29-31.

Chen Liliang Liu Ruixiang Lin Hantong. Study on the Numerical Simulation Coupling of Fluid Flow and Heat Transfer for Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 1998,(5).
[1]陈立亮,刘瑞祥,林汉同,潘增源,刘金蕾,支前明.低压铸造流动与传热耦合计算的研究[J].特种铸造及有色合金,1998(05):29-31. DOI：

Chen Liliang Liu Ruixiang Lin Hantong. Study on the Numerical Simulation Coupling of Fluid Flow and Heat Transfer for Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 1998,(5). DOI：

摘要

根据低压铸造充型流动的特点，利用计算机数值模拟技术，对低压铸造充型阶段的流动与传热过程进行了耦合计算，从而保证了模拟结果的准确性和可靠性。在此基础上开发出了模拟软件，并对实际低压铸件进行了模拟分析，结果与实际生产情况吻合很好。

Abstract

According to the characteristics of low pressure casting （LPC）

fluid flow calculations ignoring heat transfer are simplified excessively and hence not correct. In order to simulate the mold filling stage of LPC properly

both fluid flow and heat transfer must be taken into account. Therefore

a 3 D numerical simulation program coupling fluid field and temperature field of LPC has been developed. The practical applications show that the software can be used to analyze the mold filling process of LPC properly.