高耐磨、高阻尼锌铝合金研究

谢敬佩; 祝要民; 王晓颖; 陈全德

浏览量 : 0 下载量: 276 CSCD: 35

导出
分享
收藏
专辑

高耐磨、高阻尼锌铝合金研究
Investigation of ZA Alloy with High WearResistance and Damping
1999年第2期
纸质出版日期： 1999 ，
DOI：

扫描看全文

[1]谢敬佩,祝要民,王晓颖,陈全德.高耐磨、高阻尼锌铝合金研究[J].特种铸造及有色合金,1999(02):12-15.

Xie JingpeiZhu YaominWang XiaoyingChen Quande. Investigation of ZA Alloy with High WearResistance and Damping[J]. Special Casting & Nonferrous Alloys, 1999,(2).
[1]谢敬佩,祝要民,王晓颖,陈全德.高耐磨、高阻尼锌铝合金研究[J].特种铸造及有色合金,1999(02):12-15. DOI：

Xie JingpeiZhu YaominWang XiaoyingChen Quande. Investigation of ZA Alloy with High WearResistance and Damping[J]. Special Casting & Nonferrous Alloys, 1999,(2). DOI：

摘要

通过加入稀土元素和改进热处理工艺，获得一种高耐磨、高阻尼锌铝合金，该合金代替铜合金作为压力机螺母耐磨件，耐磨性是原来的３．５倍，阻尼性能从原来的０．４７８（１／Ｑ×１０－３）提高到３．１５（１／Ｑ×１０－３）

Abstract

The ZA alloy with high wearresistance and damping has been investigaed through improving heat treatment and adding rare earth.The alloy has been used for nut of the friction pressing machine instead of copper alloy.The results show that wear resistance was 3.5 times higher than that of copper alloy

damping property（1/Q10-3） was increased from 0.478 to 3.15.