消失模车间废气净化处理中工艺参数的研究

杨家宽; 黄乃瑜; 李焰

浏览量 : 0 下载量: 112 CSCD: 3

导出
分享
收藏
专辑

消失模车间废气净化处理中工艺参数的研究
Study on Processing Variables for PurifyingWaste Gases in the Lost Foam Shop
1999年第3期
纸质出版日期： 1999 ，
DOI：

扫描看全文

[1]杨家宽,黄乃瑜,李焰.消失模车间废气净化处理中工艺参数的研究[J].特种铸造及有色合金,1999(03):7-10.

Yang JiakuanHuang NaiyuLi Yan. Study on Processing Variables for PurifyingWaste Gases in the Lost Foam Shop[J]. Special Casting & Nonferrous Alloys, 1999,(3).
[1]杨家宽,黄乃瑜,李焰.消失模车间废气净化处理中工艺参数的研究[J].特种铸造及有色合金,1999(03):7-10. DOI：

Yang JiakuanHuang NaiyuLi Yan. Study on Processing Variables for PurifyingWaste Gases in the Lost Foam Shop[J]. Special Casting & Nonferrous Alloys, 1999,(3). DOI：

摘要

催化燃烧法是处理消失模车间废气的有效方法。考察了废气浓度、温度以及空速等工艺参数对苯乙烯在蜂窝型催化剂上催化燃烧净化效率的影响。结果表明，苯乙烯浓度对废气净化效率影响不大，温度对苯乙烯催化燃烧起着决定性的作用，随着空速的增加，苯乙烯的净化效率下降。

Abstract

The catalytic combustion is an effective method to purify the waste gases discharged from the lost foam shop. In this paper

the effects of such factors as the concentration of waste gases

the temperature

the space velocity etc. on the purification efficiency of styrene combustion reaction on the honeycomb catalyst were investigated.The results have shown that the concentration of styrene has little effect on styrene purification efficiency

the temperature plays a substantial role on catalytic combustion of styrene

and the purification efficiency of styrene decreases with the increase of the space velocity.

关键词

消失模铸造废气净化催化燃烧

Keywords

Lost Foam Casting ProcessPurification of Waste GasesCatalgtic Combustion

references

文章被引用时，请邮件提醒。

提交

负压消失模工艺中EPS热解产物的研究